{
  "categories": [
    {
      "name": "L_Proj",
      "displayName": "Microsoft Project 2016"
    },
    {
      "parentCategory": {
        "ref": "L_Proj"
      },
      "name": "L_ProjectOptions",
      "displayName": "Project Options"
    },
    {
      "parentCategory": {
        "ref": "L_ProjectOptions"
      },
      "name": "L_Security",
      "displayName": "Security"
    },
    {
      "parentCategory": {
        "ref": "L_ProjectOptions"
      },
      "name": "L_PjView",
      "displayName": "View"
    },
    {
      "parentCategory": {
        "ref": "L_PjView"
      },
      "name": "L_CalendarType",
      "displayName": "Calendar Type"
    },
    {
      "parentCategory": {
        "ref": "L_PjView"
      },
      "name": "L_PjShow",
      "displayName": "Show"
    },
    {
      "parentCategory": {
        "ref": "L_ProjectOptions"
      },
      "name": "L_OptionsCustomizeRibbon",
      "displayName": "Customize Ribbon"
    },
    {
      "parentCategory": {
        "ref": "L_ProjectOptions"
      },
      "name": "L_PjGeneral",
      "displayName": "General"
    },
    {
      "parentCategory": {
        "ref": "L_PjGeneral"
      },
      "name": "L_PjGeneralProjOptions",
      "displayName": "General options for Microsoft Project"
    },
    {
      "parentCategory": {
        "ref": "L_PjGeneral"
      },
      "name": "L_PjGeneralOptions",
      "displayName": "General options for 'Project1'"
    },
    {
      "parentCategory": {
        "ref": "L_ProjectOptions"
      },
      "name": "L_PjEdit",
      "displayName": "Edit"
    },
    {
      "parentCategory": {
        "ref": "L_PjEdit"
      },
      "name": "L_PjEditOptionsProj",
      "displayName": "Edit options for Microsoft Project"
    },
    {
      "parentCategory": {
        "ref": "L_PjEdit"
      },
      "name": "L_PjViewOptions",
      "displayName": "View options for time units in 'Project1'"
    },
    {
      "parentCategory": {
        "ref": "L_PjEdit"
      },
      "name": "L_PjHyperLinkAppear",
      "displayName": "Hyperlink appearance in 'Project1'"
    },
    {
      "parentCategory": {
        "ref": "L_ProjectOptions"
      },
      "name": "L_PjCalendar",
      "displayName": "Calendar"
    },
    {
      "parentCategory": {
        "ref": "L_ProjectOptions"
      },
      "name": "L_PjSchedule",
      "displayName": "Schedule"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedule"
      },
      "name": "L_PjSchedProj",
      "displayName": "Schedule options for Microsoft Project"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedule"
      },
      "name": "L_PjSchedDoc",
      "displayName": "Scheduling options for 'Project1'"
    },
    {
      "parentCategory": {
        "ref": "L_ProjectOptions"
      },
      "name": "L_PjCalculation",
      "displayName": "Calculation"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalculation"
      },
      "name": "L_PjCalcProject",
      "displayName": "Calculation options for Microsoft Project"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalculation"
      },
      "name": "L_PjCalcProjectFile",
      "displayName": "Calculation options for 'Project1'"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "name": "L_PjEV",
      "displayName": "Earned Value options for Project1"
    },
    {
      "parentCategory": {
        "ref": "L_ProjectOptions"
      },
      "name": "L_PjSave",
      "displayName": "Save"
    },
    {
      "parentCategory": {
        "ref": "L_PjSave"
      },
      "name": "L_PjFileLocations",
      "displayName": "File locations"
    },
    {
      "parentCategory": {
        "ref": "L_PjSave"
      },
      "name": "L_PjAutoSave",
      "displayName": "Auto Save Options"
    },
    {
      "parentCategory": {
        "ref": "L_PjSave"
      },
      "name": "L_PjCache",
      "displayName": "Tools | Local Project Cache"
    },
    {
      "parentCategory": {
        "ref": "L_ProjectOptions"
      },
      "name": "L_PjInterface",
      "displayName": "Interface"
    },
    {
      "parentCategory": {
        "ref": "L_PjInterface"
      },
      "name": "L_PjShowIndicators",
      "displayName": "Show indicators and Option butons for"
    },
    {
      "parentCategory": {
        "ref": "L_PjInterface"
      },
      "name": "L_PjPGSettings",
      "displayName": "Project Guide settings"
    },
    {
      "parentCategory": {
        "ref": "L_PjInterface"
      },
      "name": "L_PjPGSettingsForProject1",
      "displayName": "Project Guide settings for 'Project1'"
    },
    {
      "parentCategory": {
        "ref": "L_Security"
      },
      "name": "L_Cryptography",
      "displayName": "Cryptography"
    },
    {
      "parentCategory": {
        "ref": "L_Security"
      },
      "name": "L_TrustCenter",
      "displayName": "Trust Center"
    },
    {
      "parentCategory": {
        "ref": "L_Security"
      },
      "name": "L_PJMacro",
      "displayName": "Tools | Macro"
    },
    {
      "parentCategory": {
        "ref": "L_Proj"
      },
      "name": "L_Miscellaneous",
      "displayName": "Miscellaneous"
    }
  ],
  "policies": [
    {
      "parentCategory": {
        "ref": "L_Security"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_EnableuntrustedintranetzoneaccesstoProjectServer",
      "displayName": "Enable untrusted intranet zone access to Project server",
      "explainText": "Allows users to access Project Server Web sites and Workspaces that have not been added to their trusted internet zones. If you enable this setting, users can access Project Server and Microsoft SharePoint Foundation sites that are not in their trusted internet zones. If this setting is disabled or not configured, users are required to add the Project Server and Microsoft SharePoint Foundation sites to their trusted internet site zones.",
      "tags": [
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security",
      "valueName": "trustwss"
    },
    {
      "parentCategory": {
        "ref": "L_CalendarType"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Gregorian Calendar"
              },
              {
                "value": {
                  "decimal": {
                    "value": 6
                  }
                },
                "displayName": "Hijri Calendar"
              },
              {
                "value": {
                  "decimal": {
                    "value": 7
                  }
                },
                "displayName": "Thai Buddhist"
              }
            ],
            "valueName": "calendar type",
            "inputType": "dropdownList",
            "caption": "Calendar Type",
            "id": "L_calendartype1"
          }
        ]
      },
      "name": "L_calendartype0",
      "displayName": "Calendar Type",
      "explainText": "Allows you to set the default calendar type. You need to have the Complex Script and East Asian language packs installed on the operating system in order for this setting to be available. If you enable this setting, you can set the default calendar type. If you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_CalendarType",
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view"
    },
    {
      "parentCategory": {
        "ref": "L_PjView"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_ProjectSummaryTask",
      "displayName": "Project Summary Task",
      "explainText": "Allows you to manage whether the project summary task is displayed. If you enable this setting, the project summary task is displayed. If this setting is disabled or not configured, the user's default setting is used.",
      "tags": [
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view",
      "valueName": "show project summary"
    },
    {
      "parentCategory": {
        "ref": "L_PjView"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "string": "Bar Rollup"
                },
                "displayName": "Bar Rollup"
              },
              {
                "value": {
                  "string": "Calendar"
                },
                "displayName": "Calendar"
              },
              {
                "value": {
                  "string": "Descriptive Network Diagram"
                },
                "displayName": "Descriptive Network Diagram"
              },
              {
                "value": {
                  "string": "Detail Gantt"
                },
                "displayName": "Detail Gantt"
              },
              {
                "value": {
                  "string": "Gantt Chart"
                },
                "displayName": "Gantt Chart"
              },
              {
                "value": {
                  "string": "Leveling Gantt"
                },
                "displayName": "Leveling Gantt"
              },
              {
                "value": {
                  "string": "Milestone Date Rollup"
                },
                "displayName": "Milestone Date Rollup"
              },
              {
                "value": {
                  "string": "Milestone Rollup"
                },
                "displayName": "Milestone Rollup"
              },
              {
                "value": {
                  "string": "Network Diagram"
                },
                "displayName": "Network Diagram"
              },
              {
                "value": {
                  "string": "Relationship Diagram"
                },
                "displayName": "Relationship Diagram"
              },
              {
                "value": {
                  "string": "Resource Allocation"
                },
                "displayName": "Resource Allocation"
              },
              {
                "value": {
                  "string": "Resource Form"
                },
                "displayName": "Resource Form"
              },
              {
                "value": {
                  "string": "Resource Graph"
                },
                "displayName": "Resource Graph"
              },
              {
                "value": {
                  "string": "Resource Name Form"
                },
                "displayName": "Resource Names Form"
              },
              {
                "value": {
                  "string": "Resource Sheet"
                },
                "displayName": "Resource Sheet"
              },
              {
                "value": {
                  "string": "Resource Usage"
                },
                "displayName": "Resource Usage"
              },
              {
                "value": {
                  "string": "Task Details Form"
                },
                "displayName": "Task Details Form"
              },
              {
                "value": {
                  "string": "Task Entry"
                },
                "displayName": "Task Entry"
              },
              {
                "value": {
                  "string": "Task Form"
                },
                "displayName": "Task Form"
              },
              {
                "value": {
                  "string": "Task Name Form"
                },
                "displayName": "Task Name Form"
              },
              {
                "value": {
                  "string": "Task Sheet"
                },
                "displayName": "Task Sheet"
              },
              {
                "value": {
                  "string": "Task Usage"
                },
                "displayName": "Task Usage"
              },
              {
                "value": {
                  "string": "Tracking Gantt"
                },
                "displayName": "Tracking Gantt"
              }
            ],
            "valueName": "default view",
            "inputType": "dropdownList",
            "caption": "Default View",
            "id": "L_pjdefaultview2"
          }
        ]
      },
      "name": "L_PjDefaultView",
      "displayName": "Default View",
      "explainText": "Specifies the view that Project displays at startup.\n      \nIf you enable this setting, you can set the default view that is displayed at startup.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view"
    },
    {
      "parentCategory": {
        "ref": "L_PjView"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "1/31/00 12:33 PM"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "1/31/00"
              },
              {
                "value": {
                  "decimal": {
                    "value": 20
                  }
                },
                "displayName": "1/31/2000"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "January 31, 2000 12:33 PM"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                },
                "displayName": "January 31, 2000"
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                },
                "displayName": "Jan 31 12:33 PM"
              },
              {
                "value": {
                  "decimal": {
                    "value": 5
                  }
                },
                "displayName": "Jan 31 '00"
              },
              {
                "value": {
                  "decimal": {
                    "value": 6
                  }
                },
                "displayName": "January 31"
              },
              {
                "value": {
                  "decimal": {
                    "value": 7
                  }
                },
                "displayName": "Jan 31"
              },
              {
                "value": {
                  "decimal": {
                    "value": 8
                  }
                },
                "displayName": "Mon 1/31/00 12:33 PM"
              },
              {
                "value": {
                  "decimal": {
                    "value": 9
                  }
                },
                "displayName": "Mon 1/31/00"
              },
              {
                "value": {
                  "decimal": {
                    "value": 10
                  }
                },
                "displayName": "Mon Jan 31, '00"
              },
              {
                "value": {
                  "decimal": {
                    "value": 11
                  }
                },
                "displayName": "Mon 12:33 PM"
              },
              {
                "value": {
                  "decimal": {
                    "value": 15
                  }
                },
                "displayName": "Mon Jan 31"
              },
              {
                "value": {
                  "decimal": {
                    "value": 16
                  }
                },
                "displayName": "Mon 1/31"
              },
              {
                "value": {
                  "decimal": {
                    "value": 17
                  }
                },
                "displayName": "Mon 31"
              },
              {
                "value": {
                  "decimal": {
                    "value": 12
                  }
                },
                "displayName": "1/31"
              },
              {
                "value": {
                  "decimal": {
                    "value": 13
                  }
                },
                "displayName": "31"
              },
              {
                "value": {
                  "decimal": {
                    "value": 14
                  }
                },
                "displayName": "12:33 PM"
              },
              {
                "value": {
                  "decimal": {
                    "value": 18
                  }
                },
                "displayName": "W1/1"
              },
              {
                "value": {
                  "decimal": {
                    "value": 19
                  }
                },
                "displayName": "W1/1/00 12:33 PM"
              }
            ],
            "valueName": "date format",
            "inputType": "dropdownList",
            "caption": "Date Format",
            "id": "L_pjdateformat3"
          }
        ]
      },
      "name": "L_PjDateFormat",
      "displayName": "Date Format",
      "explainText": "Specifies the format for displaying dates.  Some information, such as time formats and the date separator, is set through the Control Panel.\n      \nIf you enable this setting, dates are displayed in the format you set.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view"
    },
    {
      "parentCategory": {
        "ref": "L_PjView"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "string": "AED"
                },
                "displayName": "United Arab Emirates, Dirhams"
              },
              {
                "value": {
                  "string": "AFA"
                },
                "displayName": "Afghanistan, Afghanis"
              },
              {
                "value": {
                  "string": "ALL"
                },
                "displayName": "Albania, Leke"
              },
              {
                "value": {
                  "string": "AMD"
                },
                "displayName": "Armenia, Drams"
              },
              {
                "value": {
                  "string": "AOA"
                },
                "displayName": "Angola, Kwanza"
              },
              {
                "value": {
                  "string": "ARS"
                },
                "displayName": "Argentina, Pesos"
              },
              {
                "value": {
                  "string": "AUD"
                },
                "displayName": "Australia, Dollars"
              },
              {
                "value": {
                  "string": "AWG"
                },
                "displayName": "Aruba, Guilders (also called Florins)"
              },
              {
                "value": {
                  "string": "AZM"
                },
                "displayName": "Azerbaijan, Manats"
              },
              {
                "value": {
                  "string": "BAM"
                },
                "displayName": "Bosnia and Herzegovina, Convertible Marka"
              },
              {
                "value": {
                  "string": "BBD"
                },
                "displayName": "Barbados, Dollars"
              },
              {
                "value": {
                  "string": "BDT"
                },
                "displayName": "Bangladesh, Taka"
              },
              {
                "value": {
                  "string": "BGN"
                },
                "displayName": "Bulgaria, Leva"
              },
              {
                "value": {
                  "string": "BHD"
                },
                "displayName": "Bahrain, Dinars"
              },
              {
                "value": {
                  "string": "BIF"
                },
                "displayName": "Burundi, Francs"
              },
              {
                "value": {
                  "string": "BMD"
                },
                "displayName": "Bermuda, Dollars"
              },
              {
                "value": {
                  "string": "BND"
                },
                "displayName": "Brunei Darussalam, Dollars"
              },
              {
                "value": {
                  "string": "BOB"
                },
                "displayName": "Bolivia, Bolivianos"
              },
              {
                "value": {
                  "string": "BRL"
                },
                "displayName": "Brazil, Brazil Real"
              },
              {
                "value": {
                  "string": "BSD"
                },
                "displayName": "Bahamas, Dollars"
              },
              {
                "value": {
                  "string": "BTN"
                },
                "displayName": "Bhutan, Ngultrum"
              },
              {
                "value": {
                  "string": "BWP"
                },
                "displayName": "Botswana, Pulas"
              },
              {
                "value": {
                  "string": "BYR"
                },
                "displayName": "Belarus, Rubles"
              },
              {
                "value": {
                  "string": "BZD"
                },
                "displayName": "Belize, Dollars"
              },
              {
                "value": {
                  "string": "CAD"
                },
                "displayName": "Canada, Dollars"
              },
              {
                "value": {
                  "string": "CDF"
                },
                "displayName": "Congo (DRC)//Kinshasa, Congolese Francs"
              },
              {
                "value": {
                  "string": "CHF"
                },
                "displayName": "Switzerland, Francs"
              },
              {
                "value": {
                  "string": "CLP"
                },
                "displayName": "Chile, Pesos"
              },
              {
                "value": {
                  "string": "CNY"
                },
                "displayName": "China, Yuan Renminbi"
              },
              {
                "value": {
                  "string": "COP"
                },
                "displayName": "Colombia, Pesos"
              },
              {
                "value": {
                  "string": "CRC"
                },
                "displayName": "Costa Rica, Colones"
              },
              {
                "value": {
                  "string": "CSD"
                },
                "displayName": "Serbia, Dinars"
              },
              {
                "value": {
                  "string": "CUP"
                },
                "displayName": "Cuba, Pesos"
              },
              {
                "value": {
                  "string": "CVE"
                },
                "displayName": "Cabo Verde, Escudos"
              },
              {
                "value": {
                  "string": "CZK"
                },
                "displayName": "Czech Republic, Koruny"
              },
              {
                "value": {
                  "string": "DJF"
                },
                "displayName": "Djibouti, Francs"
              },
              {
                "value": {
                  "string": "DKK"
                },
                "displayName": "Denmark, Kroner"
              },
              {
                "value": {
                  "string": "DOP"
                },
                "displayName": "Dominican Republic, Pesos"
              },
              {
                "value": {
                  "string": "DZD"
                },
                "displayName": "Algeria, Algeria Dinars"
              },
              {
                "value": {
                  "string": "EGP"
                },
                "displayName": "Egypt, Pounds"
              },
              {
                "value": {
                  "string": "ERN"
                },
                "displayName": "Eritrea, Nakfa"
              },
              {
                "value": {
                  "string": "ETB"
                },
                "displayName": "Ethiopia, Birr"
              },
              {
                "value": {
                  "string": "EUR"
                },
                "displayName": "Euro Member Countries, Euro"
              },
              {
                "value": {
                  "string": "FJD"
                },
                "displayName": "Fiji, Dollars"
              },
              {
                "value": {
                  "string": "FKP"
                },
                "displayName": "Falkland Islands, Pounds"
              },
              {
                "value": {
                  "string": "GBP"
                },
                "displayName": "United Kingdom, Pounds"
              },
              {
                "value": {
                  "string": "GEL"
                },
                "displayName": "Georgia, Lari"
              },
              {
                "value": {
                  "string": "GGP"
                },
                "displayName": "Guernsey, Pounds"
              },
              {
                "value": {
                  "string": "GHC"
                },
                "displayName": "Ghana, Cedis"
              },
              {
                "value": {
                  "string": "GIP"
                },
                "displayName": "Gibraltar, Pounds"
              },
              {
                "value": {
                  "string": "GMD"
                },
                "displayName": "Gambia, Dalasi"
              },
              {
                "value": {
                  "string": "GNF"
                },
                "displayName": "Guinea, Francs"
              },
              {
                "value": {
                  "string": "GTQ"
                },
                "displayName": "Guatemala, Quetzales"
              },
              {
                "value": {
                  "string": "GYD"
                },
                "displayName": "Guyana, Dollars"
              },
              {
                "value": {
                  "string": "HKD"
                },
                "displayName": "Hong Kong, Dollars"
              },
              {
                "value": {
                  "string": "HNL"
                },
                "displayName": "Honduras, Lempiras"
              },
              {
                "value": {
                  "string": "HRK"
                },
                "displayName": "Croatia, Kuna"
              },
              {
                "value": {
                  "string": "HTG"
                },
                "displayName": "Haiti, Gourdes"
              },
              {
                "value": {
                  "string": "HUF"
                },
                "displayName": "Hungary, Forint"
              },
              {
                "value": {
                  "string": "IDR"
                },
                "displayName": "Indonesia, Rupiahs"
              },
              {
                "value": {
                  "string": "ILS"
                },
                "displayName": "Israel, New Shekels"
              },
              {
                "value": {
                  "string": "IMP"
                },
                "displayName": "Isle of Man, Pounds"
              },
              {
                "value": {
                  "string": "INR"
                },
                "displayName": "India, Rupees"
              },
              {
                "value": {
                  "string": "IQD"
                },
                "displayName": "Iraq, Dinars"
              },
              {
                "value": {
                  "string": "IRR"
                },
                "displayName": "Iran, Rials"
              },
              {
                "value": {
                  "string": "ISK"
                },
                "displayName": "Iceland, Kronur"
              },
              {
                "value": {
                  "string": "JEP"
                },
                "displayName": "Jersey, Pounds"
              },
              {
                "value": {
                  "string": "JMD"
                },
                "displayName": "Jamaica, Dollars"
              },
              {
                "value": {
                  "string": "JOD"
                },
                "displayName": "Jordan, Dinars"
              },
              {
                "value": {
                  "string": "JPY"
                },
                "displayName": "Japan, Yen"
              },
              {
                "value": {
                  "string": "KES"
                },
                "displayName": "Kenya, Shillings"
              },
              {
                "value": {
                  "string": "KGS"
                },
                "displayName": "Kyrgyzstan, Soms"
              },
              {
                "value": {
                  "string": "KHR"
                },
                "displayName": "Cambodia, Riels"
              },
              {
                "value": {
                  "string": "KMF"
                },
                "displayName": "Comoros, Francs"
              },
              {
                "value": {
                  "string": "KPW"
                },
                "displayName": "North Korea, Won"
              },
              {
                "value": {
                  "string": "KRW"
                },
                "displayName": "Korea, Won"
              },
              {
                "value": {
                  "string": "KWD"
                },
                "displayName": "Kuwait, Dinars"
              },
              {
                "value": {
                  "string": "KYD"
                },
                "displayName": "Cayman Islands, Dollars"
              },
              {
                "value": {
                  "string": "KZT"
                },
                "displayName": "Kazakhstan, Tenge"
              },
              {
                "value": {
                  "string": "LAK"
                },
                "displayName": "Laos, Kips"
              },
              {
                "value": {
                  "string": "LBP"
                },
                "displayName": "Lebanon, Pounds"
              },
              {
                "value": {
                  "string": "LKR"
                },
                "displayName": "Sri Lanka, Rupees"
              },
              {
                "value": {
                  "string": "LRD"
                },
                "displayName": "Liberia, Dollars"
              },
              {
                "value": {
                  "string": "LSL"
                },
                "displayName": "Lesotho, Maloti"
              },
              {
                "value": {
                  "string": "LTL"
                },
                "displayName": "Lithuania, Litai"
              },
              {
                "value": {
                  "string": "LYD"
                },
                "displayName": "Libya, Dinars"
              },
              {
                "value": {
                  "string": "MAD"
                },
                "displayName": "Morocco, Dirhams"
              },
              {
                "value": {
                  "string": "MDL"
                },
                "displayName": "Moldova, Lei"
              },
              {
                "value": {
                  "string": "MGA"
                },
                "displayName": "Madagascar, Ariary"
              },
              {
                "value": {
                  "string": "MKD"
                },
                "displayName": "North Macedonia, Denars"
              },
              {
                "value": {
                  "string": "MMK"
                },
                "displayName": "Myanmar (Burma), Kyats"
              },
              {
                "value": {
                  "string": "MNT"
                },
                "displayName": "Mongolia, Tugriks"
              },
              {
                "value": {
                  "string": "MOP"
                },
                "displayName": "Macao, Patacas"
              },
              {
                "value": {
                  "string": "MRO"
                },
                "displayName": "Mauritania, Ouguiyas"
              },
              {
                "value": {
                  "string": "MUR"
                },
                "displayName": "Mauritius, Rupees"
              },
              {
                "value": {
                  "string": "MVR"
                },
                "displayName": "Maldives (Maldive Islands), Rufiyaa"
              },
              {
                "value": {
                  "string": "MWK"
                },
                "displayName": "Malawi, Kwachas"
              },
              {
                "value": {
                  "string": "MXN"
                },
                "displayName": "Mexico, Pesos"
              },
              {
                "value": {
                  "string": "MYR"
                },
                "displayName": "Malaysia, Ringgits"
              },
              {
                "value": {
                  "string": "MZM"
                },
                "displayName": "Mozambique, Meticais"
              },
              {
                "value": {
                  "string": "NAD"
                },
                "displayName": "Namibia, Dollars"
              },
              {
                "value": {
                  "string": "NGN"
                },
                "displayName": "Nigeria, Nairas"
              },
              {
                "value": {
                  "string": "NIO"
                },
                "displayName": "Nicaragua, Cordobas"
              },
              {
                "value": {
                  "string": "NOK"
                },
                "displayName": "Norway, Krone"
              },
              {
                "value": {
                  "string": "NPR"
                },
                "displayName": "Nepal, Nepal Rupees"
              },
              {
                "value": {
                  "string": "NZD"
                },
                "displayName": "New Zealand, Dollars"
              },
              {
                "value": {
                  "string": "OMR"
                },
                "displayName": "Oman, Rials"
              },
              {
                "value": {
                  "string": "PAB"
                },
                "displayName": "Panama, Balboa"
              },
              {
                "value": {
                  "string": "PEN"
                },
                "displayName": "Peru, Nuevos Soles"
              },
              {
                "value": {
                  "string": "PGK"
                },
                "displayName": "Papua New Guinea, Kina"
              },
              {
                "value": {
                  "string": "PHP"
                },
                "displayName": "Philippines, Pesos"
              },
              {
                "value": {
                  "string": "PKR"
                },
                "displayName": "Pakistan, Rupees"
              },
              {
                "value": {
                  "string": "PLN"
                },
                "displayName": "Poland, Zlotych"
              },
              {
                "value": {
                  "string": "PYG"
                },
                "displayName": "Paraguay, Guarani"
              },
              {
                "value": {
                  "string": "QAR"
                },
                "displayName": "Qatar, Rials"
              },
              {
                "value": {
                  "string": "RON"
                },
                "displayName": "Romania, New Lei"
              },
              {
                "value": {
                  "string": "RUB"
                },
                "displayName": "Russia, Rubles"
              },
              {
                "value": {
                  "string": "RWF"
                },
                "displayName": "Rwanda, Rwanda Francs"
              },
              {
                "value": {
                  "string": "SAR"
                },
                "displayName": "Saudi Arabia, Riyals"
              },
              {
                "value": {
                  "string": "SBD"
                },
                "displayName": "Solomon Islands, Dollars"
              },
              {
                "value": {
                  "string": "SCR"
                },
                "displayName": "Seychelles, Rupees"
              },
              {
                "value": {
                  "string": "SDD"
                },
                "displayName": "Sudan, Dinars"
              },
              {
                "value": {
                  "string": "SEK"
                },
                "displayName": "Sweden, Kronor"
              },
              {
                "value": {
                  "string": "SGD"
                },
                "displayName": "Singapore, Dollars"
              },
              {
                "value": {
                  "string": "SHP"
                },
                "displayName": "Saint Helena, Pounds"
              },
              {
                "value": {
                  "string": "SLL"
                },
                "displayName": "Sierra Leone, Leones"
              },
              {
                "value": {
                  "string": "SOS"
                },
                "displayName": "Somalia, Shillings"
              },
              {
                "value": {
                  "string": "SPL"
                },
                "displayName": "Seborga, Luigini"
              },
              {
                "value": {
                  "string": "SRD"
                },
                "displayName": "Suriname, Dollars"
              },
              {
                "value": {
                  "string": "STD"
                },
                "displayName": "São Tome and Principe, Dobras"
              },
              {
                "value": {
                  "string": "SVC"
                },
                "displayName": "El Salvador, Colones"
              },
              {
                "value": {
                  "string": "SYP"
                },
                "displayName": "Syria, Pounds"
              },
              {
                "value": {
                  "string": "SZL"
                },
                "displayName": "Swaziland, Emalangeni"
              },
              {
                "value": {
                  "string": "THB"
                },
                "displayName": "Thailand, Baht"
              },
              {
                "value": {
                  "string": "TJS"
                },
                "displayName": "Tajikistan, Somoni"
              },
              {
                "value": {
                  "string": "TMM"
                },
                "displayName": "Turkmenistan, Manats"
              },
              {
                "value": {
                  "string": "TND"
                },
                "displayName": "Tunisia, Dinars"
              },
              {
                "value": {
                  "string": "TOP"
                },
                "displayName": "Tonga, Pa'anga"
              },
              {
                "value": {
                  "string": "TRY"
                },
                "displayName": "Turkey, Lira"
              },
              {
                "value": {
                  "string": "TTD"
                },
                "displayName": "Trinidad and Tobago, Dollars"
              },
              {
                "value": {
                  "string": "TVD"
                },
                "displayName": "Tuvalu, Tuvalu Dollars"
              },
              {
                "value": {
                  "string": "TWD"
                },
                "displayName": "Taiwan, New Dollars"
              },
              {
                "value": {
                  "string": "TZS"
                },
                "displayName": "Tanzania, Shillings"
              },
              {
                "value": {
                  "string": "UAH"
                },
                "displayName": "Ukraine, Hryvnia"
              },
              {
                "value": {
                  "string": "UGX"
                },
                "displayName": "Uganda, Shillings"
              },
              {
                "value": {
                  "string": "USD"
                },
                "displayName": "United States of America, Dollars"
              },
              {
                "value": {
                  "string": "UYU"
                },
                "displayName": "Uruguay, Pesos"
              },
              {
                "value": {
                  "string": "UZS"
                },
                "displayName": "Uzbekistan, Sums"
              },
              {
                "value": {
                  "string": "VES"
                },
                "displayName": "Venezuela, Bolívar"
              },
              {
                "value": {
                  "string": "VND"
                },
                "displayName": "Vietnam, Dong"
              },
              {
                "value": {
                  "string": "VUV"
                },
                "displayName": "Vanuatu, Vatu"
              },
              {
                "value": {
                  "string": "WST"
                },
                "displayName": "Samoa, Tala"
              },
              {
                "value": {
                  "string": "XAF"
                },
                "displayName": "Communauté Financière Africaine BEAC, Francs"
              },
              {
                "value": {
                  "string": "XAG"
                },
                "displayName": "Silver, Ounces"
              },
              {
                "value": {
                  "string": "XAU"
                },
                "displayName": "Gold, Ounces"
              },
              {
                "value": {
                  "string": "XCD"
                },
                "displayName": "East Caribbean Dollars"
              },
              {
                "value": {
                  "string": "XDR"
                },
                "displayName": "International Monetary Fund (IMF) Special Drawing Rights"
              },
              {
                "value": {
                  "string": "XOF"
                },
                "displayName": "Communauté Financière Africaine BCEAO, Francs"
              },
              {
                "value": {
                  "string": "XPD"
                },
                "displayName": "Palladium Ounces"
              },
              {
                "value": {
                  "string": "XPF"
                },
                "displayName": "Comptoirs Français du Pacifique Francs"
              },
              {
                "value": {
                  "string": "XPT"
                },
                "displayName": "Platinum, Ounces"
              },
              {
                "value": {
                  "string": "YER"
                },
                "displayName": "Yemen, Rials"
              },
              {
                "value": {
                  "string": "ZAR"
                },
                "displayName": "South Africa, Rand"
              },
              {
                "value": {
                  "string": "ZMK"
                },
                "displayName": "Zambia, Kwacha"
              },
              {
                "value": {
                  "string": "ZWD"
                },
                "displayName": "Zimbabwe, Zimbabwe Dollars"
              }
            ],
            "valueName": "currency",
            "inputType": "dropdownList",
            "caption": "Default Project Currency",
            "id": "L_defaultprojectcurrency4"
          }
        ]
      },
      "name": "L_DefaultProjectCurrency",
      "displayName": "Default Project Currency",
      "explainText": "Allows you to manage whether users can set the default currency type for their new project plans. If you enable this setting, the default currency type is enforced for all new project plans. If this setting is disabled or not configured, users can set the default currency type for new project plans.",
      "tags": [
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view"
    },
    {
      "parentCategory": {
        "ref": "L_PjShow"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_AutomaticallyAddNewItemsToTheGlobalProject",
      "displayName": "Automatically add new items to the global project",
      "explainText": "This policy setting specifies whether new items (views, tables, filters, and groups) are automatically added to the global project so they are available in all of the projects.\n\nIf you enable or do not configure this policy setting, new items will be automatically added to the global project.\n\nIf you disable this policy setting, new items will not be automatically added to the global project.",
      "tags": [
        "L_PjShow",
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view",
      "valueName": "automatically add items to the global"
    },
    {
      "parentCategory": {
        "ref": "L_PjShow"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjStatusBar",
      "displayName": "Status Bar",
      "explainText": "Displays the status bar, which shows information about the progress of certain operations in Project.\n      \nIf you enable this setting, the option to display the status bar is selected.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjShow",
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view",
      "valueName": "show status bar"
    },
    {
      "parentCategory": {
        "ref": "L_PjShow"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjWindowsinStatusBar",
      "displayName": "Windows in Taskbar",
      "explainText": "Specifies whether separate windows are opened and displayed as separate buttons on the Windows taskbar for every open project.\n      \nIf you enable this setting, a new window is displayed in the taskbar for each open project.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjShow",
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view",
      "valueName": "show windows in taskbar"
    },
    {
      "parentCategory": {
        "ref": "L_PjShow"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjScrollBar",
      "displayName": "Scroll Bars",
      "explainText": "Displays scrollbars for views.\n      \nIf you enable this setting, scrollbars are displayed in the views.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjShow",
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view",
      "valueName": "show scroll bars"
    },
    {
      "parentCategory": {
        "ref": "L_PjShow"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjEntryBar",
      "displayName": "Entry Bar",
      "explainText": "Displays the entry bar, in which you can enter or edit field information.\nIf you enable this setting, the entry bar is displayed.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjShow",
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view",
      "valueName": "show entry bar"
    },
    {
      "parentCategory": {
        "ref": "L_PjShow"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjOLElinks",
      "displayName": "OLE Link Indicators",
      "explainText": "Displays the indicator for OLE linked objects in the lower-right corner of the cell that contains the link.\nIf you enable this setting, the indicator is displayed for OLE linked objects.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjShow",
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view",
      "valueName": "show ole link indicators"
    },
    {
      "parentCategory": {
        "ref": "L_PjShow"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjProjectScreentips",
      "displayName": "Project Screentips",
      "explainText": "Displays tips for Gantt bars and field headings, including dates for timescale units, and the full cell contents if a cell is too narrow to completely display the text in sheet and Network Diagram views.\n\nIf you enable this setting, tips are displayed for Gantt bars and field headings.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjShow",
        "L_PjView",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\view",
      "valueName": "show tooltips"
    },
    {
      "parentCategory": {
        "ref": "L_PjGeneral"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "undolevels",
            "minValue": 1,
            "minValueSpecified": true,
            "maxValue": 99,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "caption": "Undo Levels",
            "id": "L_undolevels5"
          }
        ]
      },
      "name": "L_UndoLevels",
      "displayName": "Undo Levels",
      "explainText": "Limits the number of actions (1-99)  that a user can undo. If you enable this setting, you can set a limit on  the number of actions (1-99) a user is can undo.  If you disable this setting or do not configure it, the user's default setting is used.",
      "tags": [
        "L_PjGeneral",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\general"
    },
    {
      "parentCategory": {
        "ref": "L_PjGeneralProjOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjOpenLast",
      "displayName": "Open last file on startup",
      "explainText": "Upon starting Project, automatically opens the last used project file.\n    \nIf you enable this setting, the last file that the user had open automatically re-opens when they start Project.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjGeneralProjOptions",
        "L_PjGeneral",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\general",
      "valueName": "start with last file"
    },
    {
      "parentCategory": {
        "ref": "L_PjGeneralProjOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjPromptForInfo",
      "displayName": "Prompt for project info for new projects",
      "explainText": "Opens the Project Information dialog box whenever the user creates a new project.\n\nIf you enable this setting, the Project Information dialog box is displayed whenever you create a new project.\n\nIf you disable or do not configure this setting, the users default setting is followed.",
      "tags": [
        "L_PjGeneralProjOptions",
        "L_PjGeneral",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\general",
      "valueName": "ask for summary info at new"
    },
    {
      "parentCategory": {
        "ref": "L_PjGeneralProjOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjSetAutoFilter",
      "displayName": "Set AutoFilter on for new projects",
      "explainText": "This policy setting turns on AutoFilter automatically when the user creates a new project.\n\nIf you enable or do not configure this policy setting, AutoFilter is automatically turned on when users create a new project.\n\nIf you disable this policy setting, AutoFilter is not automatically turned on when users create a new project.",
      "tags": [
        "L_PjGeneralProjOptions",
        "L_PjGeneral",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\general",
      "valueName": "set autofilter on for new projects"
    },
    {
      "parentCategory": {
        "ref": "L_PjGeneralProjOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "max display",
            "minValue": 0,
            "minValueSpecified": true,
            "maxValue": 50,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "caption": "Number of entries: ",
            "id": "L_PjMRUT"
          }
        ]
      },
      "name": "L_PjRecentlyUsed",
      "displayName": "Number of projects in the Recent Projects list",
      "explainText": "This policy setting specifies the number of entries displayed in the Recent Projects list that appears when users click Open on the File tab in Backstage view.  \n\nIf you enable this policy setting, you can specify the number of entries to be between 0 and 50. If you set the number to 0, all pinned and unpinned entries are hidden.\n\nIf you disable or do not configure this policy setting, a maximum of 25 items will be displayed in the Recent Projects list.\n\nNote: If you want to prevent items from being added to the Recent Projects list entirely, you can enable the \"Do not keep history of recently opened documents\" Windows policy setting.",
      "tags": [
        "L_PjGeneralProjOptions",
        "L_PjGeneral",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\file mru"
    },
    {
      "parentCategory": {
        "ref": "L_PjGeneralProjOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "max display",
            "minValue": 0,
            "minValueSpecified": true,
            "maxValue": 20,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "caption": "Number of folders: ",
            "id": "L_SetNumberOfPlacesInTheRecentPlacesListSpinID"
          }
        ]
      },
      "name": "L_SetNumberOfPlacesInTheRecentPlacesList",
      "displayName": "Number of folders in the Recent Folders list",
      "explainText": "This policy setting specifies the number of unpinned entries displayed in the Recent Folders list that appears when users click Open or Save As on the File tab in Backstage view.\n\nIf you enable this policy setting, you can specify the number of unpinned entries to be between 0 and 20. If you set the number to 0, all pinned and unpinned entries are hidden.\n\nIf you disable or do not configure this policy setting, a maximum of 5 unpinned items are displayed in the Recent Folders list.\n\nNote: If you want to prevent items from being added to the Recent Folders list entirely, you can enable the \"Do not keep history of recently opened documents\" Windows policy setting.",
      "tags": [
        "L_PjGeneralProjOptions",
        "L_PjGeneral",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\place mru"
    },
    {
      "parentCategory": {
        "ref": "L_OptionsCustomizeRibbon"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_DisplayDeveloperTab",
      "displayName": "Display Developer tab in the Ribbon",
      "explainText": "This policy setting controls whether the Developer tab will be displayed in the Ribbon.\n\nIf you enable this policy setting, the Developer tab will be displayed in the Ribbon.\n\nIf you disable this policy setting, the Developer tab will not be displayed in the Ribbon.\n\nIf you do not configure this policy setting, the Developer tab will not be displayed in the Ribbon, but its visibility can be changed via a setting in the application Options dialog box.",
      "tags": [
        "L_OptionsCustomizeRibbon",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\settings",
      "valueName": "developertools"
    },
    {
      "parentCategory": {
        "ref": "L_PjGeneralOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjAutoAddNew",
      "displayName": "Automatically add new resources and tasks",
      "explainText": "Automatically adds new resources to the resource pool and assigns them default values whenever a new resource name or new resource's initials are added.\n      \nIf you enable this setting, new resources and tasks are automatically inserted into the project.\n\nIf you disable this setting, users are alerted whenever a new resource or task is created when making a new assignment.\n\nIf you do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjGeneralOptions",
        "L_PjGeneral",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\general",
      "valueName": "auto add resources"
    },
    {
      "parentCategory": {
        "ref": "L_PjGeneralOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "std. rate",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Default standard rate",
            "id": "L_pjdefaultstdrate6"
          }
        ]
      },
      "name": "L_PjDefaultStdRate",
      "displayName": "Default standard rate",
      "explainText": "Specifies the standard pay rate for new resources.\n      \nIf you enable this setting, all new resources will use the specified standard pay rate.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjGeneralOptions",
        "L_PjGeneral",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\general"
    },
    {
      "parentCategory": {
        "ref": "L_PjGeneralOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "ovt. rate",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Default overtime rate",
            "id": "L_pjdefaultotime7"
          }
        ]
      },
      "name": "L_PjDefaultOtime",
      "displayName": "Default overtime rate",
      "explainText": "Specifies the overtime pay rate for new resources.\n      \nIf you enable this setting, all new resources will use the specified overtime pay rate\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjGeneralOptions",
        "L_PjGeneral",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\general"
    },
    {
      "parentCategory": {
        "ref": "L_PjEditOptionsProj"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjAllowCellDragDrop",
      "displayName": "Allow cell drag and drop",
      "explainText": "Allow fields in sheets to be moved using the mouse.\nIf you enable this setting, users can move rows and fields to new locations using the mouse.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjEditOptionsProj",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit",
      "valueName": "drag and drop"
    },
    {
      "parentCategory": {
        "ref": "L_PjEditOptionsProj"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjMoveAfterEnter",
      "displayName": "Move selection after enter",
      "explainText": "Automatically selects the field below the current field after the user presses the ENTER key.\n      \nIf you enable this setting, the field below the current field is selected after the user presses the ENTER key.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjEditOptionsProj",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit",
      "valueName": "entermove"
    },
    {
      "parentCategory": {
        "ref": "L_PjEditOptionsProj"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjAsktoUpdate",
      "displayName": "Ask to update automatic links",
      "explainText": "Prompts the user to update linked objects whenever they open a file containing OLE links, if the source has changed.\n      \nIf you enable this setting, users are prompted to update linked objects whose source has changed whenever they open a file containing OLE links.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjEditOptionsProj",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit",
      "valueName": "prompt for update links"
    },
    {
      "parentCategory": {
        "ref": "L_PjEditOptionsProj"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjEditDirectlyCell",
      "displayName": "Edit directly in cell",
      "explainText": "Allows editing directly in the selected cell.\n      \nIf you enable this setting, users can directly edit a cell's value.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjEditOptionsProj",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit",
      "valueName": "incelledit"
    },
    {
      "parentCategory": {
        "ref": "L_PjViewOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "m"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "min"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "minute"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                }
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                }
              }
            ],
            "valueName": "minutelabeldisplay",
            "inputType": "dropdownList",
            "caption": "Minutes",
            "id": "L_pjminutes8"
          }
        ]
      },
      "name": "L_PjMinutes",
      "displayName": "Minutes",
      "explainText": "Sets the label for minutes.\n\nIf you enable this setting, minutes are displayed with the specified label.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjViewOptions",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit"
    },
    {
      "parentCategory": {
        "ref": "L_PjViewOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "h"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "hr"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "hour"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                }
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                }
              }
            ],
            "valueName": "hourlabeldisplay",
            "inputType": "dropdownList",
            "caption": "Hours",
            "id": "L_pjhours9"
          }
        ]
      },
      "name": "L_PjHours",
      "displayName": "Hours",
      "explainText": "Sets the label for hours.\n      \nIf you enable this setting, hours are displayed with the specified label.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjViewOptions",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit"
    },
    {
      "parentCategory": {
        "ref": "L_PjViewOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "d"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "dy"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "day"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                }
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                }
              }
            ],
            "valueName": "daylabeldisplay",
            "inputType": "dropdownList",
            "caption": "Days",
            "id": "L_pjdays10"
          }
        ]
      },
      "name": "L_PjDays",
      "displayName": "Days",
      "explainText": "Sets the label for days.\n  \nIf you enable this setting, days are displayed with the specified label.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjViewOptions",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit"
    },
    {
      "parentCategory": {
        "ref": "L_PjViewOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "w"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "wk"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "week"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                }
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                }
              }
            ],
            "valueName": "weeklabeldisplay",
            "inputType": "dropdownList",
            "caption": "Weeks",
            "id": "L_PjWeeks11"
          }
        ]
      },
      "name": "L_PjWeeks",
      "displayName": "Weeks",
      "explainText": "Sets the label for weeks.\n\nIf you enable this setting, weeks are displayed with the specified label.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjViewOptions",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit"
    },
    {
      "parentCategory": {
        "ref": "L_PjViewOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "mo"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "mon"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "month"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                }
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                }
              }
            ],
            "valueName": "monthlabeldisplay",
            "inputType": "dropdownList",
            "caption": "Months",
            "id": "L_pjmonths12"
          }
        ]
      },
      "name": "L_PjMonths",
      "displayName": "Months",
      "explainText": "Sets the label for months.\n      \nIf you enable this setting, months are displayed with the specified label.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjViewOptions",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit"
    },
    {
      "parentCategory": {
        "ref": "L_PjViewOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "y"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "yr"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "year"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                }
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                }
              }
            ],
            "valueName": "yearlabeldisplay",
            "inputType": "dropdownList",
            "caption": "Years",
            "id": "L_pjyears13"
          }
        ]
      },
      "name": "L_PjYears",
      "displayName": "Years",
      "explainText": "Sets the label for years.\n      \nIf you enable this setting, years are displayed with the specified label.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjViewOptions",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit"
    },
    {
      "parentCategory": {
        "ref": "L_PjViewOptions"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjAddSpace",
      "displayName": "Add space before label",
      "explainText": "Adds a space between numbers and time unit labels.\n      \nIf you enable this setting, a space is displayed between numbers and the time unit label.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjViewOptions",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit",
      "valueName": "spacebeforetimelabel"
    },
    {
      "parentCategory": {
        "ref": "L_PjHyperLinkAppear"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 16
                  }
                },
                "displayName": "Automatic"
              },
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "Black"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Red"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "Yellow"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                },
                "displayName": "Lime"
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                },
                "displayName": "Aqua"
              },
              {
                "value": {
                  "decimal": {
                    "value": 5
                  }
                },
                "displayName": "Blue"
              },
              {
                "value": {
                  "decimal": {
                    "value": 6
                  }
                },
                "displayName": "Fuchsia"
              },
              {
                "value": {
                  "decimal": {
                    "value": 7
                  }
                },
                "displayName": "White"
              },
              {
                "value": {
                  "decimal": {
                    "value": 8
                  }
                },
                "displayName": "Maroon"
              },
              {
                "value": {
                  "decimal": {
                    "value": 9
                  }
                },
                "displayName": "Green"
              },
              {
                "value": {
                  "decimal": {
                    "value": 10
                  }
                },
                "displayName": "Olive"
              },
              {
                "value": {
                  "decimal": {
                    "value": 11
                  }
                },
                "displayName": "Navy"
              },
              {
                "value": {
                  "decimal": {
                    "value": 12
                  }
                },
                "displayName": "Purple"
              },
              {
                "value": {
                  "decimal": {
                    "value": 13
                  }
                },
                "displayName": "Teal"
              },
              {
                "value": {
                  "decimal": {
                    "value": 14
                  }
                },
                "displayName": "Gray"
              },
              {
                "value": {
                  "decimal": {
                    "value": 15
                  }
                },
                "displayName": "Silver"
              }
            ],
            "valueName": "webnotfollowedcolor",
            "inputType": "dropdownList",
            "caption": "Hyperlink color",
            "id": "L_pjhyperlinkcolour14"
          }
        ]
      },
      "name": "L_PjHyperLinkColour",
      "displayName": "Hyperlink color",
      "explainText": "Specifies the color of hyperlinks that have not yet been followed.\n      \nIf you enable this setting, hyperlinks that have not been followed are displayed in the color you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjHyperLinkAppear",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit"
    },
    {
      "parentCategory": {
        "ref": "L_PjHyperLinkAppear"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 16
                  }
                },
                "displayName": "Automatic"
              },
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "Black"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Red"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "Yellow"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                },
                "displayName": "Lime"
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                },
                "displayName": "Aqua"
              },
              {
                "value": {
                  "decimal": {
                    "value": 5
                  }
                },
                "displayName": "Blue"
              },
              {
                "value": {
                  "decimal": {
                    "value": 6
                  }
                },
                "displayName": "Fuchsia"
              },
              {
                "value": {
                  "decimal": {
                    "value": 7
                  }
                },
                "displayName": "White"
              },
              {
                "value": {
                  "decimal": {
                    "value": 8
                  }
                },
                "displayName": "Maroon"
              },
              {
                "value": {
                  "decimal": {
                    "value": 9
                  }
                },
                "displayName": "Green"
              },
              {
                "value": {
                  "decimal": {
                    "value": 10
                  }
                },
                "displayName": "Olive"
              },
              {
                "value": {
                  "decimal": {
                    "value": 11
                  }
                },
                "displayName": "Navy"
              },
              {
                "value": {
                  "decimal": {
                    "value": 12
                  }
                },
                "displayName": "Purple"
              },
              {
                "value": {
                  "decimal": {
                    "value": 13
                  }
                },
                "displayName": "Teal"
              },
              {
                "value": {
                  "decimal": {
                    "value": 14
                  }
                },
                "displayName": "Gray"
              },
              {
                "value": {
                  "decimal": {
                    "value": 15
                  }
                },
                "displayName": "Silver"
              }
            ],
            "valueName": "webfollowedcolor",
            "inputType": "dropdownList",
            "caption": "Followed hyperlink color",
            "id": "L_pjfollowedlinkcolour15"
          }
        ]
      },
      "name": "L_PjFollowedlinkColour",
      "displayName": "Followed hyperlink color",
      "explainText": "Specifies the color of hyperlinks that have already been followed.\n\nIf you enable this setting, hyperlinks that have been followed are displayed in the color you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjHyperLinkAppear",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit"
    },
    {
      "parentCategory": {
        "ref": "L_PjHyperLinkAppear"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjUnderlineLinks",
      "displayName": "Underline hyperlinks",
      "explainText": "Shows hyperlinks with underlined text.\n\nIf you enable this setting, hyperlinks are underlined.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjHyperLinkAppear",
        "L_PjEdit",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\edit",
      "valueName": "webunderlinehyperlinks"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalendar"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 6
                  }
                },
                "displayName": "Saturday"
              },
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "Sunday"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Monday"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "Tuesday"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                },
                "displayName": "Wednesday"
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                },
                "displayName": "Thursday"
              },
              {
                "value": {
                  "decimal": {
                    "value": 5
                  }
                },
                "displayName": "Friday"
              }
            ],
            "valueName": "start week day",
            "inputType": "dropdownList",
            "caption": "Week starts on",
            "id": "L_pjweekstarts16"
          }
        ]
      },
      "name": "L_PjWeekStarts",
      "displayName": "Week starts on",
      "explainText": "Specifies the day of the week on which you want the scheduling week to begin.\n\nIf you enable this setting, weeks will start on the day you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalendar",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calendar"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalendar"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "January"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "February"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                },
                "displayName": "March"
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                },
                "displayName": "April"
              },
              {
                "value": {
                  "decimal": {
                    "value": 5
                  }
                },
                "displayName": "May"
              },
              {
                "value": {
                  "decimal": {
                    "value": 6
                  }
                },
                "displayName": "June"
              },
              {
                "value": {
                  "decimal": {
                    "value": 7
                  }
                },
                "displayName": "July"
              },
              {
                "value": {
                  "decimal": {
                    "value": 8
                  }
                },
                "displayName": "August"
              },
              {
                "value": {
                  "decimal": {
                    "value": 9
                  }
                },
                "displayName": "September"
              },
              {
                "value": {
                  "decimal": {
                    "value": 10
                  }
                },
                "displayName": "October"
              },
              {
                "value": {
                  "decimal": {
                    "value": 11
                  }
                },
                "displayName": "November"
              },
              {
                "value": {
                  "decimal": {
                    "value": 12
                  }
                },
                "displayName": "December"
              }
            ],
            "valueName": "fiscal year starts in",
            "inputType": "dropdownList",
            "caption": "Fiscal year starts in",
            "id": "L_pjfiscalyear17"
          }
        ]
      },
      "name": "L_PjFiscalYear",
      "displayName": "Fiscal year starts in",
      "explainText": "Specifies the month that begins the fiscal year.\n\nIf you enable this setting, the fiscal year will start on the month you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalendar",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calendar"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalendar"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjStartingYear",
      "displayName": "Use starting year for FY numbering",
      "explainText": "Labels the fiscal year using the calendar year in which the fiscal year begins.\n\nIf you enable this setting, the label for the fiscal year is the calendar year in which the fiscal year begins.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalendar",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calendar",
      "valueName": "use starting year for fy numbering"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalendar"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "default start time",
            "minValueSpecified": false,
            "maxValue": 14400,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "caption": "Default start time (Minutes after 12am * 10)",
            "id": "L_PjDefaultStartTime2"
          }
        ]
      },
      "name": "L_PjDefaultStartTime",
      "displayName": "Default start time",
      "explainText": "Specifies the start time that Project assigns to tasks by default when you enter a start date without specifying a time.\n\nIf you enable this setting, new tasks where the user does not enter a start time will use the start time that you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalendar",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calendar"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalendar"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "default end time",
            "minValueSpecified": false,
            "maxValue": 14400,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "caption": "Default end time (Minutes after 12am * 10)",
            "id": "L_PjDefaultEndTime2"
          }
        ]
      },
      "name": "L_PjDefaultEndTime",
      "displayName": "Default end time",
      "explainText": "Specifies the finish time that Project assigns to tasks by default when you enter a finish date without specifying a time.\n\nIf you enable this setting, new tasks where the user does not enter an end time will have the end time that you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalendar",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calendar"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalendar"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "default hours/day",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Hours per day",
            "id": "L_pjhoursperday18"
          }
        ]
      },
      "name": "L_PjHoursPerDay",
      "displayName": "Hours per day",
      "explainText": "Defines the number of hours that you want Project to assign to a task when the user enters a duration of one day.\n\nIf you enable this setting, day-long tasks will be assigned the number of hours that you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalendar",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calendar"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalendar"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "default hours/week",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Hours per week",
            "id": "L_pjhoursperweek19"
          }
        ]
      },
      "name": "L_PjHoursPerWeek",
      "displayName": "Hours per week",
      "explainText": "Specifies the number of hours that you want Project to assign to a task when the user enters a duration of one week.\n\nIf you enable this setting, week-long tasks will be assigned the number of hours that you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalendar",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calendar"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalendar"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "default days/month",
            "minValue": 0,
            "minValueSpecified": true,
            "maxValue": 100,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "caption": "Days per month",
            "id": "L_pjdayspermonth20"
          }
        ]
      },
      "name": "L_PjDaysPerMonth",
      "displayName": "Days per month",
      "explainText": "Defines the number of days that you want Project to assign to a task when you enter a duration of a month.\n\nIf you enable this setting, month-long tasks will be assigned the number of days that you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalendar",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calendar"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedProj"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjShowSchedMessage",
      "displayName": "Show scheduling messages",
      "explainText": "Displays messages about schedule inconsistencies, such as a successor task starting before the finish of the predecessor task.\n\nIf you enable this setting, users will be alerted about scheduling inconsistencies.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjSchedProj",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "schedule messages"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedProj"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "Percentage"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Decimal"
              }
            ],
            "valueName": "show assignment units as a:",
            "inputType": "dropdownList",
            "caption": "Show assignment units as",
            "id": "L_pjassignmentunits21"
          }
        ]
      },
      "name": "L_PjAssignmentUnits",
      "displayName": "Show assignment units as",
      "explainText": "Shows resource assignments units as a decimal or percentage.\n\nIf you enable this setting, resource assignment units will be set to the option you choose from the list.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjSchedProj",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_SetDefaultStartDateForNewTasks",
      "displayName": "Set default start date for new tasks",
      "explainText": "This policy setting specifies the default start date for new tasks as they are entered in the current project.  For projects scheduled from the start date, the options are \"Start on Project Start Date\" and \"Start on Current Date.\"  For projects scheduled from the finish date, the options are \"Finish on Project Finish Date\" and \"Start on Current Date.\"\n\nIf you enable or do not configure this policy setting, new tasks will start on the project start date.\n\nIf you disable this policy setting, new tasks will not start on the project start date.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "new tasks start on current date"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "name": "L_SetNewTasksToBeAutomaticallyScheduled",
      "displayName": "Set new tasks to be automatically scheduled",
      "explainText": "This policy setting will set new tasks to be automatically scheduled.\n\nIf you enable this policy setting, new tasks will be automatically scheduled.\n\nIf you disable or do not configure this policy setting, new tasks will be manually scheduled.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "newtasksaremanuallyscheduled"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_UpdateManuallyScheduledTasksWhenEditingLinks",
      "displayName": "Update manually scheduled tasks when editing links",
      "explainText": "This policy setting will allow the update of manually scheduled task dates when predecessor links are created or updated.\n\nIf you enable or do not configure this policy setting, manually scheduled task dates will be updated when predecessor links are created or updated.\n\nIf you disable this policy setting, manually scheduled task dates will not be updated when predecessor links are created or updated.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "updatemanuallyscheduledtaskswheneditinglinks"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_TasksCanBeMadeInactive",
      "displayName": "Tasks can be made inactive",
      "explainText": "This policy setting will allow tasks to be inactivated.\n\nIf you enable or do not configure this policy setting, users will be able to use the Inactive tasks feature, and tasks are allowed to be inactivated.\n\nIf you disable this policy setting, tasks cannot be inactivated.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "canmakeinactivetasks"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_ShowTasksScheduleWarnings",
      "displayName": "Show tasks schedule warnings",
      "explainText": "This policy setting will allow the display of red task warnings to indicate potential problems.\n\nIf you enable or do not configure this policy setting, a red task warning will be displayed to indicate potential problems.\n\nIf you disable this policy setting, a red task warning will not be displayed to indicate potential problems.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "showtaskwarnings"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_KeepTasksOnNearestWorkingDay",
      "displayName": "Keep tasks on nearest working day",
      "explainText": "This policy setting will enable a constraint to be applied to tasks when they are toggled from Manually Scheduled Mode to Automatically Scheduled Mode, allowing the task date to be as close to the user-entered date as possible.\n\nIf you enable this policy setting, the task date will be as close to the user-entered date as possible when tasks are toggled from Manually Scheduled Mode to Automatically Scheduled Mode.\n\nIf you disable or do not configure this policy setting, the task date will not to be as close to the user-entered date when tasks are toggled from Manually Scheduled Mode to Automatically Scheduled Mode.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "keeptaskonnearestworkingtimewhenmadeautoscheduled"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_ShowTasksScheduleSuggestions",
      "displayName": "Show tasks schedule suggestions",
      "explainText": "This policy setting will allow the display of green task suggestions to indicate potential optimization.\n\nIf you enable this policy setting, a green task suggestion will be displayed to indicate potential problems.\n\nIf you disable or do not configure this policy setting, a green task suggestion will not be displayed to indicate potential problems.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "showtasksuggestions"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "Start on Project Start Date"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Start on Current Date"
              }
            ],
            "valueName": "new tasks start on current date",
            "inputType": "dropdownList",
            "caption": "New tasks",
            "id": "L_pjnewtasks22"
          }
        ]
      },
      "name": "L_PjNewTasks",
      "displayName": "New tasks",
      "explainText": "Specifies the default start date for new tasks as they are entered in the current project.  For projects scheduled from the start date, the options are \"Start on Project Start Date\" and \"Start on Current Date.\"  For projects scheduled from the finish date, the options are \"Finish on Project Finish Date\" and \"Start on Current Date.\"\n\nIf you enable this setting, new tasks will start on the date you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                },
                "displayName": "Minutes"
              },
              {
                "value": {
                  "decimal": {
                    "value": 5
                  }
                },
                "displayName": "Hours"
              },
              {
                "value": {
                  "decimal": {
                    "value": 7
                  }
                },
                "displayName": "Days"
              },
              {
                "value": {
                  "decimal": {
                    "value": 9
                  }
                },
                "displayName": "Weeks"
              },
              {
                "value": {
                  "decimal": {
                    "value": 11
                  }
                },
                "displayName": "Months"
              }
            ],
            "valueName": "default duration units",
            "inputType": "dropdownList",
            "caption": "Duration is entered in",
            "id": "L_pjdurationunits23"
          }
        ]
      },
      "name": "L_PjDurationUnits",
      "displayName": "Duration is entered in",
      "explainText": "Specifies the unit of time (minutes, hours, days, weeks, or months) used by default in the Duration field.\n\nIf you enable this setting, the unit you specify will be used if the user does not specify a unit of time when entering a duration.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                },
                "displayName": "Minutes"
              },
              {
                "value": {
                  "decimal": {
                    "value": 5
                  }
                },
                "displayName": "Hours"
              },
              {
                "value": {
                  "decimal": {
                    "value": 7
                  }
                },
                "displayName": "Days"
              },
              {
                "value": {
                  "decimal": {
                    "value": 9
                  }
                },
                "displayName": "Weeks"
              },
              {
                "value": {
                  "decimal": {
                    "value": 11
                  }
                },
                "displayName": "Months"
              }
            ],
            "valueName": "default work units",
            "inputType": "dropdownList",
            "caption": "Work is entered in",
            "id": "L_pjworkunits24"
          }
        ]
      },
      "name": "L_PjWorkUnits",
      "displayName": "Work is entered in",
      "explainText": "Specifies the default unit of time (minutes, hours, days, weeks, or months) used in the Work field in the current project.\n\nIf you enable this setting, whenever Project displays work values, the unit you specified will be used.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Fixed Duration"
              },
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "Fixed Units"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "Fixed Work"
              }
            ],
            "valueName": "default task type",
            "inputType": "dropdownList",
            "caption": "Default task type",
            "id": "L_pjdefaulttasktypes25"
          }
        ]
      },
      "name": "L_PjDefaultTaskTypes",
      "displayName": "Default task type",
      "explainText": "Specifies the default task type for new tasks.\n\nIf you enable this setting, new tasks will be set to the type that you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjNewTasksEffort",
      "displayName": "New tasks are effort driven",
      "explainText": "This policy setting specifies that new tasks are scheduled such that the work on the task remains constant as you add or remove assignments.\n\nIf you enable this policy setting, new tasks will be effort-driven.\n\nIf you disable or do not configure this policy setting, new tasks will not be effort-driven.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "new tasks effort driven"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjAutolinkTasks",
      "displayName": "Autolink inserted or moved tasks",
      "explainText": "This policy setting automatically links tasks when you cut, move, or insert them.\n\nIf you enable this policy setting, tasks will automatically be linked when you cut, move, or insert them.\n\nIf you disable or do not configure this policy setting, tasks will not automatically be linked when you cut, move, or insert them.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "edit with auto link"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjSplitinProgressTasks",
      "displayName": "Split in-progress tasks",
      "explainText": "Allows rescheduling of remaining duration and work when a task slips or reports progress ahead of schedule.\n\nIf you enable this setting, the remaining duration and work will be rescheduled if a task slips or reports progress ahead of schedule.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "auto split tasks"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjTasksHonorConstraints",
      "displayName": "Tasks will always honor their constraint dates",
      "explainText": "Specifies that Project schedules tasks according to their constraint dates.\n\nIf you enable this setting, task constraints will always be honored when tasks are scheduled.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "honorconstraints"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjShowEstimatedDurations",
      "displayName": "Show that tasks have estimated durations",
      "explainText": "Displays a question mark (?) after the duration unit of any task with an estimated duration.\n\nIf you enable this setting, tasks with estimated durations have a question mark after their duration unit.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "show estimated durations"
    },
    {
      "parentCategory": {
        "ref": "L_PjSchedDoc"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjNewTasksEstDurations",
      "displayName": "New tasks have estimated durations",
      "explainText": "Specifies that all new tasks have estimated durations.\n\nIf you enable this setting, all new tasks will require estimated durations.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjSchedDoc",
        "L_PjSchedule",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\scheduling",
      "valueName": "new tasks have estimated durations"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProject"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjAutoCalc",
      "displayName": "Automatic Calculation",
      "explainText": "Specifies that calculations should be done automatically as soon as a change is made.\n\nIf you enable this setting, calculations will be made after every change to the project.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProject",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "auto calc"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProject"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjCalcAll",
      "displayName": "Calculate all open projects",
      "explainText": "Specifies that Project should recalculate all open projects.\n\nIf you enable this setting, all open projects will be recalculated anytime Project does a calculation.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProject",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "calcall"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjUpdatingTask",
      "displayName": "Updating task status updates resource status",
      "explainText": "Automatically updates resource status, such as actual and remaining work and cost, whenever you update task status, such as percent complete, actual duration, or remaining duration.\n\nIf you enable this setting, task status updates are automatically applied to resources.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "auto track resources"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjMoveRemaining",
      "displayName": "Move start of remaining parts before status date forward to status date",
      "explainText": "Moves remaining portions of a task forward to start at the status date.\n\nIf you enable this setting, the remaining portion of the task moves forward to start at the status date.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "moveremaining"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjAndMoveCompleted",
      "displayName": "And move end of completed parts forward to status date",
      "explainText": "Moves the completed portion of a task forward to finish at the status date.\n\nIf you enable this setting, the completed portion of the task moves forward to finish at the status date.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "andmovecompleted"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjMoveCompleted",
      "displayName": "Move end of completed parts after status date back to status date",
      "explainText": "Moves the completed portion of a task back to finish at the status date.\n\nIf you enable this setting, the completed portion of the task moves back to finish at the status date.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "movecompleted"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjAndMoveRemaining",
      "displayName": "And move start of remaining parts back to status date",
      "explainText": "Moves the remaining portion of a task back to start at the status date.\n\nIf you enable this setting, the remaining portion of the task moves back to start at the status date.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "andmoveremaining"
    },
    {
      "parentCategory": {
        "ref": "L_PjEV"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "% Complete"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Physical % Complete"
              }
            ],
            "valueName": "evmethod",
            "inputType": "dropdownList",
            "caption": "Default task Earned Value method",
            "id": "L_pjevmethod26"
          }
        ]
      },
      "name": "L_PjEVMethod",
      "displayName": "Default task Earned Value method",
      "explainText": "Specifies the method used for earned value analysis.\n\nIf you enable this setting, Project will calculate earned value using the method you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjEV",
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation"
    },
    {
      "parentCategory": {
        "ref": "L_PjEV"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Baseline"
              },
              {
                "value": {
                  "decimal": {
                    "value": 12
                  }
                },
                "displayName": "Baseline 1"
              },
              {
                "value": {
                  "decimal": {
                    "value": 13
                  }
                },
                "displayName": "Baseline 2"
              },
              {
                "value": {
                  "decimal": {
                    "value": 14
                  }
                },
                "displayName": "Baseline 3"
              },
              {
                "value": {
                  "decimal": {
                    "value": 15
                  }
                },
                "displayName": "Baseline 4"
              },
              {
                "value": {
                  "decimal": {
                    "value": 16
                  }
                },
                "displayName": "Baseline 5"
              },
              {
                "value": {
                  "decimal": {
                    "value": 17
                  }
                },
                "displayName": "Baseline 6"
              },
              {
                "value": {
                  "decimal": {
                    "value": 18
                  }
                },
                "displayName": "Baseline 7"
              },
              {
                "value": {
                  "decimal": {
                    "value": 19
                  }
                },
                "displayName": "Baseline 8"
              },
              {
                "value": {
                  "decimal": {
                    "value": 20
                  }
                },
                "displayName": "Baseline 9"
              },
              {
                "value": {
                  "decimal": {
                    "value": 21
                  }
                },
                "displayName": "Baseline 10"
              }
            ],
            "valueName": "evbaseline",
            "inputType": "dropdownList",
            "caption": "Baseline for Earned Value calculations",
            "id": "L_pjevbaseline27"
          }
        ]
      },
      "name": "L_PjEVBaseline",
      "displayName": "Baseline for Earned Value calculations",
      "explainText": "Specifies the baseline that is used to measure project performance using earned value analysis.\n\nIf you enable this setting, Project will calculate earned value using the baseline you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjEV",
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjEditstoTotalTask",
      "displayName": "Edits to total task % complete will be spread to the status date",
      "explainText": "Distributes the changes to total percent complete evenly across the schedule to the project status date (or to the current date if you haven't specified a project status date).\n\nIf you enable this setting, edits to total task percent complete are evenly distributed across the schedule up to the status date.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "edits to total task %complete will be spread to the status date"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjInsertedProjects",
      "displayName": "Inserted projects are calculated like summary tasks",
      "explainText": "Specifies that a single critical path is calculated throughout the master project, by treating inserted projects as summary tasks in the master project.\n\nIf you enable this setting, the critical path is calculated by treating inserted projects as summary tasks.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "inserted projects are calculated like summary tasks"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjActualCostsCalc",
      "displayName": "Actual costs are always calculated by Microsoft Project",
      "explainText": "Specifies that Project calculates actual costs automatically, based upon resource rates, per-use resource costs, and fixed task costs.\n\nIf you enable this setting, Project will automatically calculate actual costs.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "actual costs are always calculated by microsoft office project"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjEditToTotalSpread",
      "displayName": "Edits to total actual cost will be spread to the status date",
      "explainText": "Distributes the changes to total actual cost evenly across the schedule to the status date (or to the current date if you have not specified a project status date).\n\nIf you enable this setting, Project will distribute edits to actual cost evenly across a task up to the status date.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "edits to total actual cost will be spread to the status date"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Start"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                },
                "displayName": "Prorated"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "End"
              }
            ],
            "valueName": "default fixed costs accrual",
            "inputType": "dropdownList",
            "caption": "Default fixed costs accrual",
            "id": "L_pjdefaultfixedaccrual28"
          }
        ]
      },
      "name": "L_PjDefaultFixedAccrual",
      "displayName": "Default fixed costs accrual",
      "explainText": "Specifies how Project sets the fixed cost accrual for new tasks.\n\nIf you enable this setting, new tasks will accrue fixed cost according to the specification you made.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjCalcMultipleCriticalPaths",
      "displayName": "Calculate multiple critical paths",
      "explainText": "Specifies that Project should calculate and display a critical path for each independent network of tasks within the project.\n\nIf you enable this setting, Project will calculate multiple critical paths.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation",
      "valueName": "calculate multiple critical paths"
    },
    {
      "parentCategory": {
        "ref": "L_PjCalcProjectFile"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "show as critical if slack",
            "minValue": 0,
            "minValueSpecified": true,
            "maxValue": 9999,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "caption": "Tasks are critical if slack is less than or equal to",
            "id": "L_pjcritifless29"
          }
        ]
      },
      "name": "L_PjCritIfLess",
      "displayName": "Tasks are critical if slack is less than or equal to",
      "explainText": "Specifies the number of days of slack Project uses to determine critical tasks.\n\nIf you enable this setting, tasks are marked as critical if the slack is less than or equal to the value you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjCalcProjectFile",
        "L_PjCalculation",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\calculation"
    },
    {
      "parentCategory": {
        "ref": "L_PjSave"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "string": "MSProject.MPP.12"
                },
                "displayName": "Project (*.mpp)"
              },
              {
                "value": {
                  "string": "MSProject.MPT.12"
                },
                "displayName": "Template (*.mpt)"
              },
              {
                "value": {
                  "string": "MSProject.MPP.9"
                },
                "displayName": "Project 2000-2003 (*.mpp)"
              }
            ],
            "valueName": "defaultsaveformat",
            "inputType": "dropdownList",
            "caption": "Save Microsoft Project files as",
            "id": "L_pjfiletype30"
          }
        ]
      },
      "name": "L_PjFileType",
      "displayName": "Save Microsoft Project files as",
      "explainText": "Specifies the default file format that should be applied when any Project file is saved.\n\nIf you enable this setting, project files will be saved with the format you specified.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjSave",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\save"
    },
    {
      "parentCategory": {
        "ref": "L_PjFileLocations"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "defaultprojectspath",
            "required": true,
            "requiredSpecified": true,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Projects",
            "id": "L_pjfilelocprojects31"
          }
        ]
      },
      "name": "L_PjFileLocProjects",
      "displayName": "Projects",
      "explainText": "Specifies the default location in the computer system for saving and opening projects.\n\nIf you enable this policy setting, the location first appears in the Open and Save As dialog box.\n\nIf you disable or do not configure this policy setting, the users default for this setting is followed.",
      "tags": [
        "L_PjFileLocations",
        "L_PjSave",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\save"
    },
    {
      "parentCategory": {
        "ref": "L_PjFileLocations"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "defaultusertemplatespath",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "User Templates",
            "id": "L_pjfilelocusertemplates32"
          }
        ]
      },
      "name": "L_PjFileLocUserTemplates",
      "displayName": "User Templates",
      "explainText": "Specifies the default location in the computer system for saving and opening workgroup templates.\n\nIf you enable this policy setting, the location first appears in the Open and Save As dialog box.\n\nIf you disable or do not configure this policy setting, the users default for this setting is followed.",
      "tags": [
        "L_PjFileLocations",
        "L_PjSave",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\save"
    },
    {
      "parentCategory": {
        "ref": "L_PjAutoSave"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjSaveEvery",
      "displayName": "Auto Save every",
      "explainText": "Specifies that you want Project to automatically save your projects periodically.\n\nIf you enable this setting, Project will save users projects at the specified interval.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjAutoSave",
        "L_PjSave",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\save",
      "valueName": "automaticsave"
    },
    {
      "parentCategory": {
        "ref": "L_PjAutoSave"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "automaticsaveinterval",
            "minValue": 1,
            "minValueSpecified": true,
            "maxValue": 120,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "caption": "Save Interval",
            "id": "L_pjsaveinterval33"
          }
        ]
      },
      "name": "L_PjSaveInterval",
      "displayName": "Save Interval",
      "explainText": "Specifies how often Project should automatically save your projects.  This setting is only used by Project if Auto Save has been turned on.\n\nIf you enable this setting, Project will save users projects at the specified interval.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjAutoSave",
        "L_PjSave",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\save"
    },
    {
      "parentCategory": {
        "ref": "L_PjAutoSave"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 2
        }
      },
      "name": "L_PjAutomaticSaveOption",
      "displayName": "Save Active Project only",
      "explainText": "Saves only the active project at the interval you specify.  This setting is only used by Project if Auto Save is turned on.\n\nIf you enable this setting, Project will only save the active project at specified intervals.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjAutoSave",
        "L_PjSave",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\save",
      "valueName": "automaticsaveoption"
    },
    {
      "parentCategory": {
        "ref": "L_PjAutoSave"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjAutomaticSavePrompt",
      "displayName": "Prompt before saving",
      "explainText": "Specifies whether Project should prompt the user before saving their project as a result of the Auto Save function.\n\nIf you enable this setting, users will be prompted before their project is automatically saved.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjAutoSave",
        "L_PjSave",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\save",
      "valueName": "automaticsaveprompt"
    },
    {
      "parentCategory": {
        "ref": "L_PjInterface"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_DisableInternalIDMatching",
      "displayName": "Disable Internal ID Matching",
      "explainText": "Prevent internal id matching. If you enable this setting, Project will not use internal identifiers to match different-language or renamed Organizer items between projects. If this setting is disabled or not configured, internal identifiers will be used to match different-language or renamed Organizer items between projects.",
      "tags": [
        "L_PjInterface",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\interface",
      "valueName": "disable internal id matching"
    },
    {
      "parentCategory": {
        "ref": "L_PjShowIndicators"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjResourceAssignOOUI",
      "displayName": "Resource Assigments",
      "explainText": "Specifies that the feedback triangle should appear in a corner of a field if the user assigns additional resources to a task that already has resources assigned.\n\nIf you enable this setting, a feedback triangle is displayed in the corner of a field if users assign additional resources to a task that already has resources assigned.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjShowIndicators",
        "L_PjInterface",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\interface",
      "valueName": "resourceassignooui"
    },
    {
      "parentCategory": {
        "ref": "L_PjShowIndicators"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjChangeDurationOOUI",
      "displayName": "Edits to work, units or duration",
      "explainText": "Specifies that the feedback triangle should appear in a corner of a Task Name field if you change the task's start date or finish date.\n\nIf you enable this setting, a feedback triangle is displayed in the corner of the Task Name field if the user changes the task's start or finish date.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjShowIndicators",
        "L_PjInterface",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\interface",
      "valueName": "changedurationooui"
    },
    {
      "parentCategory": {
        "ref": "L_PjShowIndicators"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjEnterDateOOUI",
      "displayName": "Edits to start and finish dates",
      "explainText": "Specifies that the feedback triangle should appear in a corner of the Duration field or the Task Name field if you change a task's work, units, or duration.\n\nIf you enable this setting, a feedback triangle is displayed in the corner of the Duration or Task Name field if the user changes the task's work, units, or duration.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjShowIndicators",
        "L_PjInterface",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\interface",
      "valueName": "enterdateooui"
    },
    {
      "parentCategory": {
        "ref": "L_PjShowIndicators"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjDeleteNameOOUI",
      "displayName": "Deletions in the Name column",
      "explainText": "Specifies that the delete indicator should appear in the Indicators field if you delete text in the Task Name or Resource Names field.\n\nIf you enable this setting, the delete indicator will appear if the user deletes a Task Name or Resource Names.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjShowIndicators",
        "L_PjInterface",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\interface",
      "valueName": "deletenameooui"
    },
    {
      "parentCategory": {
        "ref": "L_PjPGSettings"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_PjGBUIDisplayToggle",
      "displayName": "Display Project Guide",
      "explainText": "Displays the side pane containing the Project Guide.\n\nIf you enable this setting, the Project Guide will be displayed.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjPGSettings",
        "L_PjInterface",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\interface",
      "valueName": "gbuidisplaytoggle"
    },
    {
      "parentCategory": {
        "ref": "L_PjPGSettingsForProject1"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Use Microsoft Project's Default page"
              },
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "Use a custom page"
              }
            ],
            "valueName": "usedefaultstartpage",
            "inputType": "dropdownList",
            "caption": "Project Guide Functionality and Layout page",
            "id": "L_pjusedefaultstartpage34"
          },
          {
            "valueName": "gbuidefaultstartpageurl",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "URL: ",
            "id": "L_PjGBUIDefaultPageURL"
          }
        ]
      },
      "name": "L_PjUseDefaultStartPage",
      "displayName": "Project Guide Functionality and Layout page",
      "explainText": "Choose whether the side pane displays the default Project Guide or a custom Project Guide your organization has developed.\n\nIf you enable this setting, the Project Guide you specified will be displayed when the Project Guide is opened.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjPGSettingsForProject1",
        "L_PjInterface",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\interface"
    },
    {
      "parentCategory": {
        "ref": "L_PjPGSettingsForProject1"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Use Microsoft Project's default content"
              },
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "Use custom content"
              }
            ],
            "valueName": "usedefaultxmlschema",
            "inputType": "dropdownList",
            "caption": "Project Guide Content",
            "id": "L_pjusedefaultxmlschema35"
          },
          {
            "valueName": "gbuixmlschemapath",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "XML file for custom content:",
            "id": "L_PjGBUIXMLSchemaPath"
          }
        ]
      },
      "name": "L_PjUseDefaultXMLSchema",
      "displayName": "Project Guide Content",
      "explainText": "Specifies whether the side pane displays the Project Guide content that comes with Project or custom content that your organization has developed.\n\nIf you enable this setting, content for the Project Guide is loaded from the specified location.\n\nIf you disable or do not configure this setting, the user's default setting is used.",
      "tags": [
        "L_PjPGSettingsForProject1",
        "L_PjInterface",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\interface"
    },
    {
      "parentCategory": {
        "ref": "L_Security"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 0
                  }
                },
                "displayName": "Do not open or save"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Prompt when opening and saving"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "Allow opening and saving"
              }
            ],
            "valueName": "legacyfiles",
            "inputType": "dropdownList",
            "id": "L_Empty"
          }
        ]
      },
      "name": "L_Legacyfileformats",
      "displayName": "Previous-version file formats",
      "explainText": "Allows you manage whether users can open or save files in Project with file formats from previous versions or file formats that are not default. By default, users can not open or save files with formats from previous versions.",
      "tags": [
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security"
    },
    {
      "parentCategory": {
        "ref": "L_Cryptography"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "cipheralgorithm",
            "required": true,
            "requiredSpecified": true,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "CNG cipher algorithm:",
            "id": "L_SetCNGCipherAlgorithmID"
          }
        ]
      },
      "name": "L_SetCNGCipherAlgorithm",
      "displayName": "Set CNG cipher algorithm",
      "explainText": "This policy setting allows you to configure the CNG cipher algorithm that is used.\n\nIf you enable this policy setting, then the cipher provided will be used if it is a supported algorithm.\n\nIf you disable or do not configure this policy setting, AES will be used.",
      "tags": [
        "L_Cryptography",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\crypto"
    },
    {
      "parentCategory": {
        "ref": "L_Cryptography"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "string": "ChainingModeCBC"
                },
                "displayName": "Cipher Block Chaining (CBC)"
              },
              {
                "value": {
                  "string": "ChainingModeCFB"
                },
                "displayName": "Cipher Feedback (CFB)"
              }
            ],
            "valueName": "cipherchaining",
            "inputType": "dropdownList",
            "id": "L_ConfigureCNGCipherChainingModeDropID"
          }
        ]
      },
      "name": "L_ConfigureCNGCipherChainingMode",
      "displayName": "Configure CNG cipher chaining mode",
      "explainText": "This policy setting allows you to configure the cipher chaining mode used.\n\nIf you enable this policy setting, the cipher chaining mode specified will be applied.\n\nIf you disable or do not configure this policy setting, Cipher Block Chaining (CBC) will be the default CNG cipher chaining mode used.",
      "tags": [
        "L_Cryptography",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\crypto"
    },
    {
      "parentCategory": {
        "ref": "L_Cryptography"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "cipherkeybits",
            "minValue": 0,
            "minValueSpecified": true,
            "maxValue": 1000000,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "caption": "Cipher key length",
            "id": "L_SetCNGCipherKeyLengthSpinID"
          }
        ]
      },
      "name": "L_SetCNGCipherKeyLength",
      "displayName": "Set CNG cipher key length",
      "explainText": "This policy setting allows you to configure the number of bits to use when creating the cipher key.  This number will be rounded down to a multiple of 8.\n\nIf you enable this policy setting, the key bits specified will be used.\n\nIf you disable or do not configure this policy setting, the default value will be used.",
      "tags": [
        "L_Cryptography",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\crypto"
    },
    {
      "parentCategory": {
        "ref": "L_Cryptography"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "context",
            "required": true,
            "requiredSpecified": true,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Parameters",
            "id": "L_SetParametersForCNGContextID"
          }
        ]
      },
      "name": "L_SetParametersForCNGContext",
      "displayName": "Set parameters for CNG context",
      "explainText": "This policy setting allows you to specify the encryption parameters that should be used for the CNG context. \n\nIf you enable this policy setting, the parameters specified will be passed to the CNG context.\n\nIf you disable or do not configure this policy setting, the default CNG values will be used.",
      "tags": [
        "L_Cryptography",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\crypto"
    },
    {
      "parentCategory": {
        "ref": "L_Cryptography"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "string": "SHA1"
                },
                "displayName": "SHA1"
              },
              {
                "value": {
                  "string": "SHA256"
                },
                "displayName": "SHA256"
              },
              {
                "value": {
                  "string": "SHA384"
                },
                "displayName": "SHA384"
              },
              {
                "value": {
                  "string": "SHA512"
                },
                "displayName": "SHA512"
              }
            ],
            "valueName": "hashalgorithm",
            "inputType": "dropdownList",
            "id": "L_SpecifyCNGHashAlgorithmDropID"
          }
        ]
      },
      "name": "L_SpecifyCNGHashAlgorithm",
      "displayName": "Specify CNG hash algorithm",
      "explainText": "This policy setting allows you to specify the hash algorithm used.\n\nIf you enable this policy setting, the hashing algorithm selected will be used by CNG.\n\nIf you disable or do not configure this policy setting, the default CNG hash algorithm will be used.",
      "tags": [
        "L_Cryptography",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\crypto"
    },
    {
      "parentCategory": {
        "ref": "L_Cryptography"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "passwordspincount",
            "minValue": 0,
            "minValueSpecified": true,
            "maxValue": 10000000,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "id": "L_SetCNGPasswordSpinCountSpinID"
          }
        ]
      },
      "name": "L_SetCNGPasswordSpinCount",
      "displayName": "Set CNG password spin count",
      "explainText": "This policy setting allows you to specify the number of times to spin (rehash) the password verifier.\n\nIf you enable this policy setting, the number specified will be the number of times the password will be rehashed.\n\nIf you disable or do not configure this policy setting, the default (100000) will be used.",
      "tags": [
        "L_Cryptography",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\crypto"
    },
    {
      "parentCategory": {
        "ref": "L_Cryptography"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "rngalgorithm",
            "required": true,
            "requiredSpecified": true,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Random number generator:",
            "id": "L_SpecifyCNGRandomNumberGeneratorAlgorithmID"
          }
        ]
      },
      "name": "L_SpecifyCNGRandomNumberGeneratorAlgorithm",
      "displayName": "Specify CNG random number generator algorithm",
      "explainText": "This policy setting allows you to configure the CNG random number generator to use.\n\nIf you enable this policy setting, the random number generator specified will be used.\n\nIf you disable or do not configure this policy setting, the default random number generator will be used.",
      "tags": [
        "L_Cryptography",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\crypto"
    },
    {
      "parentCategory": {
        "ref": "L_Cryptography"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "saltbytes",
            "minValue": 0,
            "minValueSpecified": true,
            "maxValue": 5000,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "caption": "Number of bytes",
            "id": "L_SpecifyCNGSaltLengthSpinID"
          }
        ]
      },
      "name": "L_SpecifyCNGSaltLength",
      "displayName": "Specify CNG salt length",
      "explainText": "This policy setting allows you to specific the number of bytes of salt that should be used.\n\nIf you enable this policy setting, the bytes specified will be used.\n\nIf you disable or do not configure this policy setting, the default length or 16 will be used.",
      "tags": [
        "L_Cryptography",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\crypto"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_Disableallapplicationextensions",
      "displayName": "Disable all application add-ins",
      "explainText": "This policy setting disables all add-ins for the specified Office 2016 applications.\n     \nIf you enable this policy setting, all add-ins for the specified Office 2016 applications are disabled.\n\nIf you disable or do not configure this policy setting, all add-ins for the specified Office 2016 applications are allowed to run without notifying the users, except if application add-ins are required to be signed by Trusted Publishers.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security",
      "valueName": "disablealladdins"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "Disable all with notification"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                },
                "displayName": "Disable all except digitally signed macros"
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                },
                "displayName": "Disable all without notification"
              },
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Enable all macros (not recommended)"
              }
            ],
            "valueName": "vbawarnings",
            "inputType": "dropdownList",
            "id": "L_Empty"
          }
        ]
      },
      "name": "L_VBAWarningsPolicy",
      "displayName": "VBA Macro Notification Settings",
      "explainText": "This policy setting controls how the specified applications warn users when Visual Basic for Applications (VBA) macros are present.\n\nIf you enable this policy setting, you can choose from four options for determining how the specified applications will warn the user about macros:\n \n- Disable all with notification:  The application displays the Trust Bar for all macros, whether signed or unsigned. This option enforces the default configuration in Office.\n \n- Disable all except digitally signed macros: The application displays the Trust Bar for digitally signed macros, allowing users to enable them or leave them disabled. Any unsigned macros are disabled, and users are not notified.\n \n- Disable all without notification: The application disables all macros, whether signed or unsigned, and does not notify users.\n \n- Enable all macros (not recommended):  All macros are enabled, whether signed or unsigned. This option can significantly reduce security by allowing dangerous code to run undetected.\n \nIf you disable this policy setting, \"Disable all with notification\" will be the default setting.\n \nIf you do not configure this policy setting, when users open files in the specified applications that contain VBA macros, the applications open the files with the macros disabled and display the Trust Bar with a warning that macros are present and have been disabled. Users can inspect and edit the files if appropriate, but cannot use any disabled functionality until they enable it by clicking \"Enable Content\" on the Trust Bar.  If the user clicks \"Enable Content\", then the document is added as a trusted document.\n \nImportant: If \"Disable all except digitally signed macros\" is selected, users will not be able to open unsigned Access databases.\n \nAlso, note that Microsoft Office stores certificates for trusted publishers in the Internet Explorer trusted publisher store. Earlier versions of Microsoft Office stored trusted publisher certificate information (specifically, the certificate thumbprint) in a special Office trusted publisher store. Microsoft Office still reads trusted publisher certificate information from the Office trusted publisher store, but it does not write information to this store.\n \nTherefore, if you created a list of trusted publishers in a previous version of Microsoft Office and you upgrade to Office, your trusted publisher list will still be recognized. However, any trusted publisher certificates that you add to the list will be stored in the Internet Explorer trusted publisher store.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_RequirethatApplicationExtensionsaresigned",
      "displayName": "Require that application add-ins are signed by Trusted Publisher",
      "explainText": "This policy setting controls whether add-ins for this applications must be digitally signed by a trusted publisher.\n \nIf you enable this policy setting, this application checks the digital signature for each add-in before loading it. If an add-in does not have a digital signature, or if the signature did not come from a trusted publisher, this application disables the add-in and notifies the user. Certificates must be added to the Trusted Publishers list if you require that all add-ins be signed by a trusted publisher. For detail on about obtaining and distributing certificates, see http://go.microsoft.com/fwlink/?LinkId=294922. Office 2016 stores certificates for trusted publishers in the Internet Explorer trusted publisher store. Earlier versions of Microsoft Office stored trusted publisher certificate information (specifically, the certificate thumbprint) in a special Office trusted publisher store.  Office 2016 still reads trusted publisher certificate information from the Office trusted publisher store, but it does not write information to this store. Therefore, if you created a list of trusted publishers in a previous version of Office and you upgrade to Office 2016, your trusted publisher list will still be recognized. However, any trusted publisher certificates that you add to the list will be stored in the Internet Explorer trusted publisher store. For more information about trusted publishers, see the Office Resource Kit.\n\nIf you disable or do not configure this policy setting, this application does not check the digital signature on application add-ins before opening them. If a dangerous add-in is loaded, it could harm users' computers or compromise data security.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security",
      "valueName": "requireaddinsig"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_DisableTrustBarNotificationforunsigned",
      "displayName": "Disable Trust Bar Notification for unsigned application add-ins and block them",
      "explainText": "This policy setting controls whether the specified Office application notifies users when unsigned application add-ins are loaded or silently disable such add-ins without notification. This policy setting only applies if you enable the \"Require that application add-ins are signed by Trusted Publisher\" policy setting, which prevents users from changing this policy setting.\n\nIf you enable this policy setting, applications automatically disable unsigned add-ins without informing users.\n \nIf you disable this policy setting, if this application is configured to require that all add-ins be signed by a trusted publisher, any unsigned add-ins the application loads will be disabled and the application will display the Trust Bar at the top of the active window. The Trust Bar contains a message that informs users about the unsigned add-in.\n\nIf you do not configure this policy setting, the disable behavior applies, and in addition, users can configure this requirement themselves in the \"Add-ins\" category of the Trust Center for the application.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security",
      "valueName": "notbpromptunsignedaddin"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_AllowTrustedLocationsOnTheNetwork",
      "displayName": "Allow Trusted Locations on the network",
      "explainText": "This policy setting controls whether trusted locations on the network can be used.\n\nIf you enable this policy setting, users can specify trusted locations on network shares or in other remote locations that are not under their direct control by clicking the \"Add new location\" button in the Trusted Locations section of the Trust Center. Content, code, and add-ins are allowed to load from trusted locations with minimal security and without prompting the user for permission.\n\nIf you disable this policy setting, the selected application ignores any network locations listed in the Trusted Locations section of the Trust Center. \n\nIf you also deploy Trusted Locations via Group Policy, you should verify whether any of them are remote locations. If any of them are remote locations and you do not allow remote locations via this policy setting, those policy keys that point to remote locations will be ignored on client computers.\n\nDisabling this policy setting does not delete any network locations from the Trusted Locations list, but causes disruption for users who add network locations to the Trusted Locations list. Users are also prevented from adding new network locations to the Trusted Locations list in the Trust Center.  We recommended that you do not enable this policy setting (as the \"Allow Trusted Locations on my network (not recommended)\" check box also states). Therefore, in practice, it should be possible to disable this policy setting in most situations without causing significant usability issues for most users.\n\nIf you do not enable this policy setting, users can select the \"Allow Trusted Locations on my network (not recommended)\" check box if desired and then specify trusted locations by clicking the \"Add new location\" button.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations",
      "valueName": "allownetworklocations"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_DisableTrustedLoc",
      "displayName": "Disable all trusted locations",
      "explainText": "This policy setting allows administrators to disable all trusted locations in the specified applications. Trusted locations specified in the Trust Center are used to define file locations that are assumed to be safe. Content, code, and add-ins are allowed to load from trusted locations with a minimal amount of security, without prompting the users for permission. If a dangerous file is opened from a trusted location, it will not be subject to standard security measures and could harm users' computers or data.\n\nIf you enable this policy setting, all trusted locations (those specified in the Trust Center) in the specified applications are ignored, including any trusted locations established by Office 2016 during setup, deployed to users using Group Policy, or added by users themselves.  Users will be prompted again when opening files from trusted locations.\n\nIf you disable or do not configure this policy setting, all trusted locations (those specified in the Trust Center) in the specified applications are assumed to be safe.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations",
      "valueName": "alllocationsdisabled"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_Pathcolon"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_Datecolon"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_Descriptioncolon"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_Allowsubfolders"
          }
        ]
      },
      "name": "L_TrustedLoc01",
      "displayName": "Trusted Location #1",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location1"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon12"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon13"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon14"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders15"
          }
        ]
      },
      "name": "L_TrustedLoc02",
      "displayName": "Trusted Location #2",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location2"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon16"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon17"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon18"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders19"
          }
        ]
      },
      "name": "L_TrustedLoc03",
      "displayName": "Trusted Location #3",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location3"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon20"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon21"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon22"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders23"
          }
        ]
      },
      "name": "L_TrustedLoc04",
      "displayName": "Trusted Location #4",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location4"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon24"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon25"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon26"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders27"
          }
        ]
      },
      "name": "L_TrustedLoc05",
      "displayName": "Trusted Location #5",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location5"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon28"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon29"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon30"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders31"
          }
        ]
      },
      "name": "L_TrustedLoc06",
      "displayName": "Trusted Location #6",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location6"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon32"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon33"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon34"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders35"
          }
        ]
      },
      "name": "L_TrustedLoc07",
      "displayName": "Trusted Location #7",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location7"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon36"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon37"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon38"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders39"
          }
        ]
      },
      "name": "L_TrustedLoc08",
      "displayName": "Trusted Location #8",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location8"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon40"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon41"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon42"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders43"
          }
        ]
      },
      "name": "L_TrustedLoc09",
      "displayName": "Trusted Location #9",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location9"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon44"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon45"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon46"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders47"
          }
        ]
      },
      "name": "L_TrustedLoc10",
      "displayName": "Trusted Location #10",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location10"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon48"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon49"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon50"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders51"
          }
        ]
      },
      "name": "L_TrustedLoc11",
      "displayName": "Trusted Location #11",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location11"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon52"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon53"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon54"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders55"
          }
        ]
      },
      "name": "L_TrustedLoc12",
      "displayName": "Trusted Location #12",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location12"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon56"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon57"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon58"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders59"
          }
        ]
      },
      "name": "L_TrustedLoc13",
      "displayName": "Trusted Location #13",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location13"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon60"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon61"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon62"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders63"
          }
        ]
      },
      "name": "L_TrustedLoc14",
      "displayName": "Trusted Location #14",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location14"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon64"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon65"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon66"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders67"
          }
        ]
      },
      "name": "L_TrustedLoc15",
      "displayName": "Trusted Location #15",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location15"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon68"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon69"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon70"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders71"
          }
        ]
      },
      "name": "L_TrustedLoc16",
      "displayName": "Trusted Location #16",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location16"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon72"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon73"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon74"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders75"
          }
        ]
      },
      "name": "L_TrustedLoc17",
      "displayName": "Trusted Location #17",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location17"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon76"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon77"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon78"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders79"
          }
        ]
      },
      "name": "L_TrustedLoc18",
      "displayName": "Trusted Location #18",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location18"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon80"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon81"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon82"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders83"
          }
        ]
      },
      "name": "L_TrustedLoc19",
      "displayName": "Trusted Location #19",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location19"
    },
    {
      "parentCategory": {
        "ref": "L_TrustCenter"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "path",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Path:",
            "id": "L_pathcolon84"
          },
          {
            "valueName": "date",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Date:",
            "id": "L_datecolon85"
          },
          {
            "valueName": "description",
            "requiredSpecified": false,
            "expandableSpecified": false,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Description:",
            "id": "L_descriptioncolon86"
          },
          {
            "trueValue": {
              "decimal": {
                "value": 1
              }
            },
            "falseValue": {
              "decimal": {
                "value": 0
              }
            },
            "valueName": "allowsubfolders",
            "inputType": "checkBox",
            "caption": "Allow sub folders:",
            "id": "L_allowsubfolders87"
          }
        ]
      },
      "name": "L_TrustedLoc20",
      "displayName": "Trusted Location #20",
      "explainText": "This policy setting allows you to specify a location that is used as a trusted source for opening files in this application.  Files in trusted locations bypass file validation, active content checks and Protected View. Macros and code in these files will execute without displaying warnings to the user. If you change or add a location make sure that the new location is secured, with only appropriate user permissions to add document/files.\n\nIf you enable this policy setting, you may specify a folder location, path, and date from which files can the application can open files which run macros without warning.  If you check the \"Allow sub folders\" check box, then all sub-folders in the folder you specify will also be trusted.\n\nIf you disable or do not configure this policy setting, the trusted location is not specified.",
      "tags": [
        "L_TrustCenter",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security\\trusted locations\\location20"
    },
    {
      "parentCategory": {
        "ref": "L_PJMacro"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "item": [
              {
                "value": {
                  "decimal": {
                    "value": 1
                  }
                },
                "displayName": "Low (not recommended)"
              },
              {
                "value": {
                  "decimal": {
                    "value": 2
                  }
                },
                "displayName": "Medium"
              },
              {
                "value": {
                  "decimal": {
                    "value": 3
                  }
                },
                "displayName": "High"
              },
              {
                "value": {
                  "decimal": {
                    "value": 4
                  }
                },
                "displayName": "Very High"
              }
            ],
            "valueName": "level",
            "inputType": "dropdownList",
            "caption": "Security Level",
            "id": "L_pjsecuritylevel36"
          }
        ]
      },
      "name": "L_PjSecurityLevel",
      "displayName": "Security Level",
      "explainText": "Specifies the level of security used when opening documents.\n\nIf you enable this policy setting, the security level you specified will be used when user open documents.\n\nIf you disable or do not configure this policy setting, the users default for this setting is followed.",
      "tags": [
        "L_PJMacro",
        "L_Security",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\security"
    },
    {
      "parentCategory": {
        "ref": "L_PjCache"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "cachelocation",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Local Project Cache Location",
            "id": "L_cachelocation37"
          }
        ]
      },
      "name": "L_CacheLocation",
      "displayName": "Local Project Cache Location",
      "explainText": "Sets the location path of the local project cache on the user's computer.",
      "tags": [
        "L_PjCache",
        "L_PjSave",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\settings"
    },
    {
      "parentCategory": {
        "ref": "L_PjCache"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "cachesizeperprofile",
            "minValueSpecified": false,
            "maxValue": 999,
            "maxValueSpecified": false,
            "inputType": "decimalTextBox",
            "caption": "Local Project Cache Size Limit in MB",
            "id": "L_cachesizeperprofile38"
          }
        ]
      },
      "name": "L_CacheSizePerProfile",
      "displayName": "Local Project Cache Size Limit in MB",
      "explainText": "Sets the size limit in MB of the local project cache.  This is applied per user profile. If this setting is enabled, the size of the cache will be set to the number specified. If this setting is disabled or not configured, users are able to set the cache size limit.",
      "tags": [
        "L_PjCache",
        "L_PjSave",
        "L_ProjectOptions",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\settings"
    },
    {
      "parentCategory": {
        "ref": "L_Miscellaneous"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "recenttemplateslist",
            "minValue": 0,
            "minValueSpecified": true,
            "maxValue": 9,
            "maxValueSpecified": true,
            "inputType": "decimalTextBox",
            "caption": "Most Recently Used Template List Length",
            "id": "L_mrutemplatelistlength39"
          }
        ]
      },
      "name": "L_MRUTemplateListLength",
      "displayName": "Most Recently Used Template List Length",
      "explainText": "This setting determines the length of the recently used templates list in the New Document task pane (File New...). The maximum value is 9 and the minimum value is 0. This setting applies only applies to Project.",
      "tags": [
        "L_Miscellaneous",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\common\\general"
    },
    {
      "parentCategory": {
        "ref": "L_Miscellaneous"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_DisableOfficeStartProject",
      "displayName": "Disable the Office Start screen for Project",
      "explainText": "This policy setting controls whether the Office Start screen appears on boot for Project.\n\nIf you enable this policy setting, users will not see the Office Start screen when they boot Project.\n\nIf you disable or do not configure this policy setting, users will see the Office Start screen when they boot Project.\n\nNote: This policy setting is overridden by the policy setting \"Microsoft Office 2016 > Miscellaneous > Disable the Office Start screen for all Office applications\" if that policy setting is set.",
      "tags": [
        "L_Miscellaneous",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\general",
      "valueName": "disableboottoofficestart"
    },
    {
      "parentCategory": {
        "ref": "L_Miscellaneous"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "elements": {
        "items": [
          {
            "valueName": "personaltemplates",
            "requiredSpecified": false,
            "expandable": true,
            "expandableSpecified": true,
            "maxLength": 2147483647,
            "maxLengthSpecified": false,
            "inputType": "textBox",
            "caption": "Personal templates path",
            "id": "L_PersonalTemplatesPath"
          }
        ]
      },
      "name": "L_PersonalTemplatesPath",
      "displayName": "Personal templates path for Project",
      "explainText": "This policy setting specifies the location of a user's personal templates. \n\nIf you enable this policy setting, users will see any templates they have saved in the specified location in the custom templates tab on the Office Start screen and in File | New and when saving a template their default folder will change to be the specified location. \n\nIf you disable or do not configure this policy setting, users will not see templates they have saved in the custom templates tab on the Office Start screen and in File | New and when saving a template their default folder will be their document save location.",
      "tags": [
        "L_Miscellaneous",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\save"
    },
    {
      "parentCategory": {
        "ref": "L_Miscellaneous"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledValue": {
        "decimal": {
          "value": 1
        }
      },
      "disabledValue": {
        "decimal": {
          "value": 0
        }
      },
      "name": "L_DefaultCustomTab",
      "displayName": "Show custom templates tab by default in Project on the Office Start screen and in File | New",
      "explainText": "This policy setting controls whether custom templates (when they exist) show as the default tab in Project on the Office Start screen and in File | New. \n\nIf you enable this policy setting, users will the see custom templates tab as the default tab in Project on the Office Start screen and in File | New when templates exist (this can include Custom XML programmed templates, templates in the Workgroup templates path, templates in the Personal templates path, or SharePoint templates).\n\nIf you disable or do not configure this policy setting, users will see the Featured templates tab as the default tab in Project on the Office Start screen and in File | New, unless all Office-provided templates have been disabled.",
      "tags": [
        "L_Miscellaneous",
        "L_Proj"
      ],
      "application": "proj16",
      "key": "software\\microsoft\\office\\16.0\\ms project\\options\\general",
      "valueName": "officestartdefaulttab"
    },
    {
      "parentCategory": {
        "ref": "L_Advanced"
      },
      "supportedOn": {
        "ref": "windows:SUPPORTED_Windows7"
      },
      "enabledList": [
        {
          "value": {
            "string": "true"
          },
          "valueName": "Microsoft.Office.UXPlatform.FluentSVRefresh"
        },
        {
          "value": {
            "string": "true"
          },
          "valueName": "Microsoft.Office.UXPlatform.RibbonTouchOptimization"
        },
        {
          "value": {
            "string": "true"
          },
          "valueName": "Microsoft.Office.UXPlatform.FluentSVRibbonOptionsMenu"
        }
      ],
      "disabledList": [
        {
          "value": {
            "string": "false"
          },
          "valueName": "Microsoft.Office.UXPlatform.FluentSVRefresh"
        },
        {
          "value": {
            "string": "false"
          },
          "valueName": "Microsoft.Office.UXPlatform.RibbonTouchOptimization"
        },
        {
          "value": {
            "string": "false"
          },
          "valueName": "Microsoft.Office.UXPlatform.FluentSVRibbonOptionsMenu"
        }
      ],
      "name": "L_projectVisualRefresh",
      "displayName": "Visual refresh settings",
      "explainText": "Enable or disable visual refresh. may not work for some versions of Office.\n\nData provided by Office Tool Plus.",
      "tags": [
        "L_Advanced"
      ],
      "application": "proj16",
      "key": "Software\\Microsoft\\Office\\16.0\\Common\\ExperimentConfigs\\ExternalFeatureOverrides\\project"
    }
  ]
}